c@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ c

c
c          ##########################################################################
c          #                                                                        #
c          #                             GEOPACK-2008                               #
c          #                     (MAIN SET OF FORTRAN CODES)                        #
c          #                 (IGRF coefficients updated 12/24/2024)                 #
c          ##########################################################################
C
c
c  This collection of subroutines is a result of several upgrades of the original package
c  written by N. A. Tsyganenko in 1978-1979.
c
c  PREFATORY NOTE TO THE VERSION OF FEBRUARY 8, 2008:
c
c  To avoid inappropriate use of obsolete subroutines from earlier versions, a suffix 08 was
c  added to the name of each subroutine in this release.
c
c  A possibility has been added in this version to calculate vector components in the
c  "Geocentric Solar Wind" (GSW) coordinate system, which, to our knowledge, was first
c  introduced by Hones et al., Planet. Space Sci., v.34, p.889, 1986 (aka GSWM, see Appendix,
c  Tsyganenko et al., JGRA, v.103(A4), p.6827, 1998). The GSW system is analogous to the
c  standard GSM, except that its X-axis is antiparallel to the currently observed solar wind
c  flow vector, rather than aligned with the Earth-Sun line. The orientation of axes in the
c  GSW system can be uniquely defined by specifying three components (VGSEX,VGSEY,VGSEZ) of
c  the solar wind velocity, and in the case of a strictly radial anti-sunward flow (VGSEY=
c  VGSEZ=0) the GSW system becomes identical to the standard GSM, which fact was used here
c  to minimize the number of subroutines in the package. To that end, instead of the special
c  case of the GSM coordinates, this version uses a more general GSW system, and three more
c  input parameters are added in the subroutine RECALC_08, the observed values (VGSEX,VGSEY,
c  VGSEZ) of the solar wind velocity. Invoking RECALC_08 with VGSEY=VGSEZ=0 restores the
c  standard (sunward) orientation of the X axis, which allows one to easily convert vectors
c  between GSW and GSM, as well as to/from other standard and commonly used systems. For more
c  details, see the documentation file GEOPACK-2008.DOC.
c
c  Another modification allows users to have more control over the procedure of field line
c  mapping using the subroutine TRACE_08. To that end, three new input parameters were added
c  in that subroutine, allowing one to set (i) an upper limit, DSMAX, on the automatically
c  adjusted step size, (ii) a permissible step error, ERR, and (iii) maximal length, LMAX,
c  of arrays where field line point coordinates are stored. Minor changes were also made in
c  the tracing subroutine, to make it more compact and easier for understanding, and to
c  prevent the algorithm from making uncontrollable large number of multiple loops in some
c  cases with plasmoid-like field structures.
c
C  One more subroutine, named GEODGEO_08, was added to the package, allowing one to convert
c  geodetic coordinates of a point in space (altitude above the Earth's WGS84 ellipsoid and
c  geodetic latitude) to geocentric radial distance and colatitude, and vice versa.
c
C  For a complete list of modifications made earlier in previous versions, see the
c  documentation file GEOPACK-2008.DOC.
c
c----------------------------------------------------------------------------------
c
      SUBROUTINE IGRF_GSW_08 (XGSW,YGSW,ZGSW,HXGSW,HYGSW,HZGSW)
c
C  CALCULATES COMPONENTS OF THE MAIN (INTERNAL) GEOMAGNETIC FIELD IN THE GEOCENTRIC SOLAR-WIND
C  (GSW) COORDINATE SYSTEM, USING IAGA INTERNATIONAL GEOMAGNETIC REFERENCE MODEL COEFFICIENTS
C  (e.g., https://www.ngdc.noaa.gov/IAGA/vmod/coeffs/igrf14coeffs.txt, updated 24 December, 2024)
c
C  THE GSW SYSTEM IS ESSENTIALLY SIMILAR TO THE STANDARD GSM (THE TWO SYSTEMS BECOME IDENTICAL
C  TO EACH OTHER IN THE CASE OF STRICTLY ANTI-SUNWARD SOLAR WIND FLOW). FOR A DETAILED
C  DEFINITION, SEE INTRODUCTORY COMMENTS FOR THE SUBROUTINE GSWGSE_08 .
C
C  BEFORE THE FIRST CALL OF THIS SUBROUTINE, OR, IF THE DATE/TIME (IYEAR,IDAY,IHOUR,MIN,ISEC),
C  OR THE SOLAR WIND VELOCITY COMPONENTS (VGSEX,VGSEY,VGSEZ) HAVE CHANGED, THE MODEL COEFFICIENTS
c  AND GEO-GSW ROTATION MATRIX ELEMENTS SHOULD BE UPDATED BY CALLING THE SUBROUTINE RECALC_08.
C
C-----INPUT PARAMETERS:
C
C     XGSW,YGSW,ZGSW - CARTESIAN GEOCENTRIC SOLAR-WIND COORDINATES (IN UNITS RE=6371.2 KM)
C
C-----OUTPUT PARAMETERS:
C
C     HXGSW,HYGSW,HZGSW - CARTESIAN GEOCENTRIC SOLAR-WIND COMPONENTS OF THE MAIN GEOMAGNETIC
C                           FIELD IN NANOTESLA
C
C     LAST MODIFICATION:  DEC 24, 2024 (new IGRF-14 coeffs).
C     THIS VERSION OF THE CODE ACCEPTS DATES FROM 1965 THROUGH 2030.
c
C     AUTHOR: N. A. TSYGANENKO
C
C
      COMMON /GEOPACK2/ G(105),H(105),REC(105)

      DIMENSION A(14),B(14)

      CALL GEOGSW_08 (XGEO,YGEO,ZGEO,XGSW,YGSW,ZGSW,-1)
      RHO2=XGEO**2+YGEO**2
      R=SQRT(RHO2+ZGEO**2)
      C=ZGEO/R
      RHO=SQRT(RHO2)
      S=RHO/R
      IF (S.LT.1.E-5) THEN
        CF=1.
        SF=0.
      ELSE
        CF=XGEO/RHO
        SF=YGEO/RHO
      ENDIF
C
      PP=1./R
      P=PP
C
C  IN THIS VERSION, THE OPTIMAL VALUE OF THE PARAMETER NM (MAXIMAL ORDER OF THE SPHERICAL
C    HARMONIC EXPANSION) IS NOT USER-PRESCRIBED, BUT CALCULATED INSIDE THE SUBROUTINE, BASED
C      ON THE VALUE OF THE RADIAL DISTANCE R:
C
      IRP3=R+2
      NM=3+30/IRP3
      IF (NM.GT.13) NM=13

      K=NM+1
      DO 150 N=1,K
         P=P*PP
         A(N)=P
150      B(N)=P*N

      P=1.
      D=0.
      BBR=0.
      BBT=0.
      BBF=0.

      DO 200 M=1,K
         IF(M.EQ.1) GOTO 160
         MM=M-1
         W=X
         X=W*CF+Y*SF
         Y=Y*CF-W*SF
         GOTO 170
160      X=0.
         Y=1.
170      Q=P
         Z=D
         BI=0.
         P2=0.
         D2=0.
         DO 190 N=M,K
            AN=A(N)
            MN=N*(N-1)/2+M
            E=G(MN)
            HH=H(MN)
            W=E*Y+HH*X                                                                                  
            BBR=BBR+B(N)*W*Q
            BBT=BBT-AN*W*Z
            IF(M.EQ.1) GOTO 180
            QQ=Q
            IF(S.LT.1.E-5) QQ=Z
            BI=BI+AN*(E*X-HH*Y)*QQ
180         XK=REC(MN)
            DP=C*Z-S*Q-XK*D2
            PM=C*Q-XK*P2
            D2=Z
            P2=Q
            Z=DP
190        Q=PM
         D=S*D+C*P
         P=S*P
         IF(M.EQ.1) GOTO 200
         BI=BI*MM
         BBF=BBF+BI
200   CONTINUE
C
      BR=BBR
      BT=BBT
      IF(S.LT.1.E-5) GOTO 210
      BF=BBF/S
      GOTO 211
210   IF(C.LT.0.) BBF=-BBF
      BF=BBF

211   HE=BR*S+BT*C
      HXGEO=HE*CF-BF*SF
      HYGEO=HE*SF+BF*CF
      HZGEO=BR*C-BT*S
C
      CALL GEOGSW_08 (HXGEO,HYGEO,HZGEO,HXGSW,HYGSW,HZGSW,1)
C
      RETURN
      END
C
c==========================================================================================
C
c
      SUBROUTINE IGRF_GEO_08 (R,THETA,PHI,BR,BTHETA,BPHI)
c
C  CALCULATES COMPONENTS OF THE MAIN (INTERNAL) GEOMAGNETIC FIELD IN THE SPHERICAL GEOGRAPHIC
C  (GEOCENTRIC) COORDINATE SYSTEM, USING IAGA INTERNATIONAL GEOMAGNETIC REFERENCE MODEL IGRF-14 
C  (see https://www.ngdc.noaa.gov/IAGA/vmod/coeffs/igrf14coeffs.txt)
C
C  BEFORE THE FIRST CALL OF THIS SUBROUTINE, OR IF THE DATE (IYEAR AND IDAY) WAS CHANGED,
C  THE MODEL COEFFICIENTS SHOULD BE UPDATED BY CALLING THE SUBROUTINE RECALC_08
C
C-----INPUT PARAMETERS:
C
C   R, THETA, PHI - SPHERICAL GEOGRAPHIC (GEOCENTRIC) COORDINATES:
C   RADIAL DISTANCE R IN UNITS RE=6371.2 KM, COLATITUDE THETA AND LONGITUDE PHI IN RADIANS
C
C-----OUTPUT PARAMETERS:
C
C     BR, BTHETA, BPHI - SPHERICAL COMPONENTS OF THE MAIN GEOMAGNETIC FIELD IN NANOTESLA
C      (POSITIVE BR OUTWARD, BTHETA SOUTHWARD, BPHI EASTWARD)
C
C     LAST MODIFICATION:  DEC 24, 2024 (new IGRF-14 coeffs).
C     THIS VERSION OF THE  CODE ACCEPTS DATES FROM 1965 THROUGH 2030.
c
C     AUTHOR: N. A. TSYGANENKO
C
C
      COMMON /GEOPACK2/ G(105),H(105),REC(105)

      DIMENSION A(14),B(14)

      C=COS(THETA)
      S=SIN(THETA)
      CF=COS(PHI)
      SF=SIN(PHI)
C
      PP=1./R
      P=PP
C
C  IN THIS NEW VERSION, THE OPTIMAL VALUE OF THE PARAMETER NM (MAXIMAL ORDER OF THE SPHERICAL
C    HARMONIC EXPANSION) IS NOT USER-PRESCRIBED, BUT CALCULATED INSIDE THE SUBROUTINE, BASED
C      ON THE VALUE OF THE RADIAL DISTANCE R:
C
      IRP3=R+2
      NM=3+30/IRP3
      IF (NM.GT.13) NM=13

      K=NM+1
      DO 150 N=1,K
         P=P*PP
         A(N)=P
150      B(N)=P*N

      P=1.
      D=0.
      BBR=0.
      BBT=0.
      BBF=0.

      DO 200 M=1,K
         IF(M.EQ.1) GOTO 160
         MM=M-1
         W=X
         X=W*CF+Y*SF
         Y=Y*CF-W*SF
         GOTO 170
160      X=0.
         Y=1.
170      Q=P
         Z=D
         BI=0.
         P2=0.
         D2=0.
         DO 190 N=M,K
            AN=A(N)
            MN=N*(N-1)/2+M
            E=G(MN)
            HH=H(MN)
            W=E*Y+HH*X
            BBR=BBR+B(N)*W*Q
            BBT=BBT-AN*W*Z
            IF(M.EQ.1) GOTO 180
            QQ=Q
            IF(S.LT.1.E-5) QQ=Z
            BI=BI+AN*(E*X-HH*Y)*QQ
180         XK=REC(MN)
            DP=C*Z-S*Q-XK*D2
            PM=C*Q-XK*P2
            D2=Z
            P2=Q
            Z=DP
190        Q=PM
         D=S*D+C*P
         P=S*P
         IF(M.EQ.1) GOTO 200
         BI=BI*MM
         BBF=BBF+BI
200   CONTINUE
C
      BR=BBR
      BTHETA=BBT
      IF(S.LT.1.E-5) GOTO 210
      BPHI=BBF/S
      RETURN
210   IF(C.LT.0.) BBF=-BBF
      BPHI=BBF

      RETURN
      END
C
c==========================================================================================
c
       SUBROUTINE DIP_08 (XGSW,YGSW,ZGSW,BXGSW,BYGSW,BZGSW)
C
C  CALCULATES GSW (GEOCENTRIC SOLAR-WIND) COMPONENTS OF GEODIPOLE FIELD WITH THE DIPOLE MOMENT
C  CORRESPONDING TO THE EPOCH, SPECIFIED BY CALLING SUBROUTINE RECALC_08 (SHOULD BE
C  INVOKED BEFORE THE FIRST USE OF THIS ONE, OR IF THE DATE/TIME, AND/OR THE OBSERVED
C  SOLAR WIND DIRECTION, HAVE CHANGED.
C
C  THE GSW COORDINATE SYSTEM IS ESSENTIALLY SIMILAR TO THE STANDARD GSM (THE TWO SYSTEMS BECOME
C  IDENTICAL TO EACH OTHER IN THE CASE OF STRICTLY RADIAL ANTI-SUNWARD SOLAR WIND FLOW). ITS
C  DETAILED DEFINITION IS GIVEN IN INTRODUCTORY COMMENTS FOR THE SUBROUTINE GSWGSE_08 .

C--INPUT PARAMETERS: XGSW,YGSW,ZGSW - GSW COORDINATES IN RE (1 RE = 6371.2 km)
C
C--OUTPUT PARAMETERS: BXGSW,BYGSW,BZGSW - FIELD COMPONENTS IN GSW SYSTEM, IN NANOTESLA.
C
C  LAST MODIFICATION: JAN 28, 2008.
C
C  AUTHOR: N. A. TSYGANENKO
C
      COMMON /GEOPACK1/ AA(10),SPS,CPS,BB(22)
      COMMON /GEOPACK2/ G(105),H(105),REC(105)
C
      DIPMOM=SQRT(G(2)**2+G(3)**2+H(3)**2)
C
      P=XGSW**2
      U=ZGSW**2
      V=3.*ZGSW*XGSW
      T=YGSW**2
      Q=DIPMOM/SQRT(P+T+U)**5
      BXGSW=Q*((T+U-2.*P)*SPS-V*CPS)
      BYGSW=-3.*YGSW*Q*(XGSW*SPS+ZGSW*CPS)
      BZGSW=Q*((P+T-2.*U)*CPS-V*SPS)
      RETURN
      END

C*******************************************************************
c
      SUBROUTINE SUN_08 (IYEAR,IDAY,IHOUR,MIN,ISEC,GST,SLONG,SRASN,SDEC)
C
C  CALCULATES FOUR QUANTITIES NECESSARY FOR COORDINATE TRANSFORMATIONS
C  WHICH DEPEND ON SUN POSITION (AND, HENCE, ON UNIVERSAL TIME AND SEASON)
C
C-------  INPUT PARAMETERS:
C  IYR,IDAY,IHOUR,MIN,ISEC -  YEAR, DAY, AND UNIVERSAL TIME IN HOURS, MINUTES,
C    AND SECONDS  (IDAY=1 CORRESPONDS TO JANUARY 1).
C
C-------  OUTPUT PARAMETERS:
C  GST - GREENWICH MEAN SIDEREAL TIME, SLONG - LONGITUDE ALONG ECLIPTIC
C  SRASN - RIGHT ASCENSION,  SDEC - DECLINATION  OF THE SUN (RADIANS)
C  ORIGINAL VERSION OF THIS SUBROUTINE HAS BEEN COMPILED FROM:
C  RUSSELL, C.T., COSMIC ELECTRODYNAMICS, 1971, V.2, PP.184-196.
C
C  LAST MODIFICATION:  MARCH 31, 2003 (ONLY SOME NOTATION CHANGES)
C
C     ORIGINAL VERSION WRITTEN BY:    Gilbert D. Mead
C
      DOUBLE PRECISION DJ,FDAY
      DATA RAD/57.295779513/
C
      IF(IYEAR.LT.1901.OR.IYEAR.GT.2099) RETURN
      FDAY=DFLOAT(IHOUR*3600+MIN*60+ISEC)/86400.D0
      DJ=365*(IYEAR-1900)+(IYEAR-1901)/4+IDAY-0.5D0+FDAY
      T=DJ/36525.
      VL=DMOD(279.696678+0.9856473354*DJ,360.D0)
      GST=DMOD(279.690983+.9856473354*DJ+360.*FDAY+180.,360.D0)/RAD
      G=DMOD(358.475845+0.985600267*DJ,360.D0)/RAD
      SLONG=(VL+(1.91946-0.004789*T)*SIN(G)+0.020094*SIN(2.*G))/RAD
      IF(SLONG.GT.6.2831853) SLONG=SLONG-6.2831853
      IF (SLONG.LT.0.) SLONG=SLONG+6.2831853
      OBLIQ=(23.45229-0.0130125*T)/RAD
      SOB=SIN(OBLIQ)
      SLP=SLONG-9.924E-5
C
C   THE LAST CONSTANT IS A CORRECTION FOR THE ANGULAR ABERRATION DUE TO
C   EARTH'S ORBITAL MOTION
C
      SIND=SOB*SIN(SLP)
      COSD=SQRT(1.-SIND**2)
      SC=SIND/COSD
      SDEC=ATAN(SC)
      SRASN=3.141592654-ATAN2(COS(OBLIQ)/SOB*SC,-COS(SLP)/COSD)
      RETURN
      END
C
C================================================================================
c
      SUBROUTINE SPHCAR_08 (R,THETA,PHI,X,Y,Z,J)
C
C   CONVERTS SPHERICAL COORDS INTO CARTESIAN ONES AND VICE VERSA
C    (THETA AND PHI IN RADIANS).
C
C                  J>0            J<0
C-----INPUT:   J,R,THETA,PHI     J,X,Y,Z
C----OUTPUT:      X,Y,Z        R,THETA,PHI
C
C  NOTE: AT THE POLES (X=0 AND Y=0) WE ASSUME PHI=0 WHEN CONVERTING
C        FROM CARTESIAN TO SPHERICAL COORDS (I.E., FOR J<0)
C
C   LAST MOFIFICATION:  APRIL 1, 2003 (ONLY SOME NOTATION CHANGES AND MORE
C                         COMMENTS ADDED)
C
C   AUTHOR:  N. A. TSYGANENKO
C
      IF(J.GT.0) GOTO 3
      SQ=X**2+Y**2
      R=SQRT(SQ+Z**2)
      IF (SQ.NE.0.) GOTO 2
      PHI=0.
      IF (Z.LT.0.) GOTO 1
      THETA=0.
      RETURN
  1   THETA=3.141592654
      RETURN
  2   SQ=SQRT(SQ)
      PHI=ATAN2(Y,X)
      THETA=ATAN2(SQ,Z)
      IF (PHI.LT.0.) PHI=PHI+6.28318531
      RETURN
  3   SQ=R*SIN(THETA)
      X=SQ*COS(PHI)
      Y=SQ*SIN(PHI)
      Z=R*COS(THETA)
      RETURN
      END
C
C===========================================================================
c
      SUBROUTINE BSPCAR_08 (THETA,PHI,BR,BTHETA,BPHI,BX,BY,BZ)
C
C   CALCULATES CARTESIAN FIELD COMPONENTS FROM LOCAL SPHERICAL ONES
C
C-----INPUT:   THETA,PHI - SPHERICAL ANGLES OF THE POINT IN RADIANS
C              BR,BTHETA,BPHI -  LOCAL SPHERICAL COMPONENTS OF THE FIELD
C-----OUTPUT:  BX,BY,BZ - CARTESIAN COMPONENTS OF THE FIELD
C
C   LAST MOFIFICATION:  APRIL 1, 2003 (ONLY SOME NOTATION CHANGES)
C
C   WRITTEN BY:  N. A. TSYGANENKO
C
      S=SIN(THETA)
      C=COS(THETA)
      SF=SIN(PHI)
      CF=COS(PHI)
      BE=BR*S+BTHETA*C
      BX=BE*CF-BPHI*SF
      BY=BE*SF+BPHI*CF
      BZ=BR*C-BTHETA*S
      RETURN
      END
c
C==============================================================================
C
      SUBROUTINE BCARSP_08 (X,Y,Z,BX,BY,BZ,BR,BTHETA,BPHI)
C
CALCULATES LOCAL SPHERICAL FIELD COMPONENTS FROM THOSE IN CARTESIAN SYSTEM
C
C-----INPUT:   X,Y,Z  - CARTESIAN COMPONENTS OF THE POSITION VECTOR
C              BX,BY,BZ - CARTESIAN COMPONENTS OF THE FIELD VECTOR
C-----OUTPUT:  BR,BTHETA,BPHI - LOCAL SPHERICAL COMPONENTS OF THE FIELD VECTOR
C
C  NOTE: AT THE POLES (THETA=0 OR THETA=PI) WE ASSUME PHI=0,
C        AND HENCE BTHETA=BX, BPHI=BY
C
C   WRITTEN AND ADDED TO THIS PACKAGE:  APRIL 1, 2003,
C   AUTHOR:   N. A. TSYGANENKO
C
      RHO2=X**2+Y**2
      R=SQRT(RHO2+Z**2)
      RHO=SQRT(RHO2)

      IF (RHO.NE.0.) THEN
        CPHI=X/RHO
        SPHI=Y/RHO
       ELSE
        CPHI=1.
        SPHI=0.
      ENDIF

      CT=Z/R
      ST=RHO/R

      BR=(X*BX+Y*BY+Z*BZ)/R
      BTHETA=(BX*CPHI+BY*SPHI)*CT-BZ*ST
      BPHI=BY*CPHI-BX*SPHI

      RETURN
      END
C
c=====================================================================================
C
      SUBROUTINE RECALC_08 (IYEAR,IDAY,IHOUR,MIN,ISEC,VGSEX,VGSEY,VGSEZ)
C
C  1. PREPARES ELEMENTS OF ROTATION MATRICES FOR TRANSFORMATIONS OF VECTORS BETWEEN
C     SEVERAL COORDINATE SYSTEMS, MOST FREQUENTLY USED IN SPACE PHYSICS.
C
C  2. PREPARES COEFFICIENTS USED IN THE CALCULATION OF THE MAIN GEOMAGNETIC FIELD
C      (IGRF MODEL)
C
C  THIS SUBROUTINE SHOULD BE INVOKED BEFORE USING THE FOLLOWING SUBROUTINES:
C  IGRF_GEO_08, IGRF_GSW_08, DIP_08, GEOMAG_08, GEOGSW_08, MAGSW_08, SMGSW_08, GSWGSE_08,
c  GEIGEO_08, TRACE_08, STEP_08, RHAND_08.
C
C  THERE IS NO NEED TO REPEATEDLY INVOKE RECALC_08, IF MULTIPLE CALCULATIONS ARE MADE
C    FOR THE SAME DATE/TIME AND SOLAR WIND FLOW DIRECTION.
C
C-----INPUT PARAMETERS:
C
C     IYEAR   -  YEAR NUMBER (FOUR DIGITS)
C     IDAY  -  DAY OF YEAR (DAY 1 = JAN 1)
C     IHOUR -  HOUR OF DAY (00 TO 23)
C     MIN   -  MINUTE OF HOUR (00 TO 59)
C     ISEC  -  SECONDS OF MINUTE (00 TO 59)
C     VGSEX,VGSEY,VGSEZ - GSE (GEOCENTRIC SOLAR-ECLIPTIC) COMPONENTS OF THE OBSERVED
C                              SOLAR WIND FLOW VELOCITY (IN KM/S)
C
C  IMPORTANT: IF ONLY QUESTIONABLE INFORMATION (OR NO INFORMATION AT ALL) IS AVAILABLE
C             ON THE SOLAR WIND SPEED, OR, IF THE STANDARD GSM AND/OR SM COORDINATES ARE
C             INTENDED TO BE USED, THEN SET VGSEX=-400.0 AND VGSEY=VGSEZ=0. IN THIS CASE,
C             THE GSW COORDINATE SYSTEM BECOMES IDENTICAL TO THE STANDARD GSM.
C
C             IF ONLY SCALAR SPEED V OF THE SOLAR WIND IS KNOWN, THEN SETTING
C             VGSEX=-V, VGSEY=29.78, VGSEZ=0.0 WILL TAKE INTO ACCOUNT THE ~4 degs
C             ABERRATION OF THE MAGNETOSPHERE DUE TO EARTH'S ORBITAL MOTION
C
C             IF ALL THREE GSE COMPONENTS OF THE SOLAR WIND VELOCITY ARE AVAILABLE,
C             PLEASE NOTE THAT IN SOME SOLAR WIND DATABASES THE ABERRATION EFFECT
C             HAS ALREADY BEEN TAKEN INTO ACCOUNT BY SUBTRACTING 29.78 KM/S FROM VYGSE;
C             IN THAT CASE, THE UNABERRATED (OBSERVED) VYGSE VALUES SHOULD BE RESTORED
C             BY ADDING BACK THE 29.78 KM/S CORRECTION. WHETHER OR NOT TO DO THAT, MUST
C             BE EITHER VERIFIED WITH THE DATA ORIGINATOR OR DETERMINED BY AVERAGING
C             VGSEY OVER A SUFFICIENTLY LONG TIME INTERVAL.
C
C-----OUTPUT PARAMETERS:  NONE (ALL OUTPUT QUANTITIES ARE PLACED
C                         INTO THE COMMON BLOCKS /GEOPACK1/ AND /GEOPACK2/)
C
C    OTHER SUBROUTINES CALLED BY THIS ONE: SUN_08
C
C    AUTHOR:  N.A. TSYGANENKO
C
C    ORIGINALLY WRITTEN:    DEC.1, 1991
C
C    MOST RECENT REVISION: DECEMBER 24, 2024:
C
C     The table of IGRF coefficients was extended to include those for the epoch 2025 (igrf-14)
c         (for details, see https://www.ngdc.noaa.gov/IAGA/vmod/coeffs/igrf14coeffs.txt)
C-----------------------------------------------------------------------------------   
c    EARLIER REVISIONS:
c                                
C    REVISION OF NOVEMBER 30, 2010:
C
C     The table of IGRF coefficients was extended to include those for the epoch 2010
c         (for details, see http://www.ngdc.noaa.gov/IAGA/vmod/igrf.html)
C------------------------------------------------------------------------------------
C    REVISION OF NOVEMBER 15, 2007: ADDED THE POSSIBILITY TO TAKE INTO ACCOUNT THE OBSERVED
C     DEFLECTION OF THE SOLAR WIND FLOW FROM STRICTLY RADIAL DIRECTION. TO THAT END, THREE
C     GSE COMPONENTS OF THE SOLAR WIND VELOCITY WERE ADDED TO THE INPUT PARAMETERS.
C ---------------------------------------------------------------------------------------
c    CORRECTION OF MAY 9, 2006:  INTERPOLATION OF THE COEFFICIENTS (BETWEEN
C     LABELS 50 AND 105) IS NOW MADE THROUGH THE LAST ELEMENT OF THE ARRAYS
C     G(105)  AND H(105) (PREVIOUSLY MADE ONLY THROUGH N=66, WHICH IN SOME
C     CASES CAUSED RUNTIME ERRORS)
c --------------------------------------------------------------------------------------------
C    REVISION OF MAY 3, 2005:
C     The table of IGRF coefficients was extended to include those for the epoch 2005
c       the maximal order of spherical harmonics was also increased up to 13
c         (for details, see http://www.ngdc.noaa.gov/IAGA/vmod/igrf.html)
c ---------------------------------------------------------------------------------------------
C    REVISION OF APRIL 3, 2003:
c    The code now includes preparation of the model coefficients for the subroutines
c    IGRF_08 and GEOMAG_08. This eliminates the need for the SAVE statements, used
c    in the old versions, making the codes easier and more compiler-independent.
C---------------------------------------------------------------------------------------------------
C
      COMMON /GEOPACK1/ ST0,CT0,SL0,CL0,CTCL,STCL,CTSL,STSL,SFI,CFI,
     * SPS,CPS,DS3,CGST,SGST,PSI,A11,A21,A31,A12,A22,A32,A13,A23,A33,
     * E11,E21,E31,E12,E22,E32,E13,E23,E33
C
C  THE COMMON BLOCK /GEOPACK1/ CONTAINS ELEMENTS OF THE ROTATION MATRICES AND OTHER
C   PARAMETERS RELATED TO THE COORDINATE TRANSFORMATIONS PERFORMED BY THIS PACKAGE
C
      COMMON /GEOPACK2/ G(105),H(105),REC(105)
C
C  THE COMMON BLOCK /GEOPACK2/ CONTAINS COEFFICIENTS OF THE IGRF FIELD MODEL, CALCULATED
C    FOR A GIVEN YEAR AND DAY FROM THEIR STANDARD EPOCH VALUES. THE ARRAY REC CONTAINS
C    COEFFICIENTS USED IN THE RECURSION RELATIONS FOR LEGENDRE ASSOCIATE POLYNOMIALS.
C
      DIMENSION G65(105),H65(105),G70(105),H70(105),G75(105),H75(105),
     + G80(105),H80(105),G85(105),H85(105),G90(105),H90(105),G95(105),
     + H95(105),G00(105),H00(105),G05(105),H05(105),G10(105),H10(105),
     + G15(105),H15(105),G20(105),H20(105),G25(105),H25(105),DG25(45),
     + DH25(45)
C
      DATA G65/0.,-30334.,-2119.,-1662.,2997.,1594.,1297.,-2038.,1292.,
     *856.,957.,804.,479.,-390.,252.,-219.,358.,254.,-31.,-157.,-62.,
     *45.,61.,8.,-228.,4.,1.,-111.,75.,-57.,4.,13.,-26.,-6.,13.,1.,13.,
     *5.,-4.,-14.,0.,8.,-1.,11.,4.,8.,10.,2.,-13.,10.,-1.,-1.,5.,1.,-2.,
     *-2.,-3.,2.,-5.,-2.,4.,4.,0.,2.,2.,0.,39*0./
      DATA H65/0.,0.,5776.,0.,-2016.,114.,0.,-404.,240.,-165.,0.,148.,
     *-269.,13.,-269.,0.,19.,128.,-126.,-97.,81.,0.,-11.,100.,68.,-32.,
     *-8.,-7.,0.,-61.,-27.,-2.,6.,26.,-23.,-12.,0.,7.,-12.,9.,-16.,4.,
     *24.,-3.,-17.,0.,-22.,15.,7.,-4.,-5.,10.,10.,-4.,1.,0.,2.,1.,2.,
     *6.,-4.,0.,-2.,3.,0.,-6.,39*0./
c
      DATA G70/0.,-30220.,-2068.,-1781.,3000.,1611.,1287.,-2091.,1278.,
     *838.,952.,800.,461.,-395.,234.,-216.,359.,262.,-42.,-160.,-56.,
     *43.,64.,15.,-212.,2.,3.,-112.,72.,-57.,1.,14.,-22.,-2.,13.,-2.,
     *14.,6.,-2.,-13.,-3.,5.,0.,11.,3.,8.,10.,2.,-12.,10.,-1.,0.,3.,
     *1.,-1.,-3.,-3.,2.,-5.,-1.,6.,4.,1.,0.,3.,-1.,39*0./
      DATA H70/0.,0.,5737.,0.,-2047.,25.,0.,-366.,251.,-196.,0.,167.,
     *-266.,26.,-279.,0.,26.,139.,-139.,-91.,83.,0.,-12.,100.,72.,-37.,
     *-6.,1.,0.,-70.,-27.,-4.,8.,23.,-23.,-11.,0.,7.,-15.,6.,-17.,6.,
     *21.,-6.,-16.,0.,-21.,16.,6.,-4.,-5.,10.,11.,-2.,1.,0.,1.,1.,3.,
     *4.,-4.,0.,-1.,3.,1.,-4.,39*0./
c
      DATA G75/0.,-30100.,-2013.,-1902.,3010.,1632.,1276.,-2144.,1260.,
     *830.,946.,791.,438.,-405.,216.,-218.,356.,264.,-59.,-159.,-49.,
     *45.,66.,28.,-198.,1.,6.,-111.,71.,-56.,1.,16.,-14.,0.,12.,-5.,
     *14.,6.,-1.,-12.,-8.,4.,0.,10.,1.,7.,10.,2.,-12.,10.,-1.,-1.,4.,
     *1.,-2.,-3.,-3.,2.,-5.,-2.,5.,4.,1.,0.,3.,-1.,39*0./
      DATA H75/0.,0.,5675.,0.,-2067.,-68.,0.,-333.,262.,-223.,0.,191.,
     *-265.,39.,-288.,0.,31.,148.,-152.,-83.,88.,0.,-13.,99.,75.,-41.,
     *-4.,11.,0.,-77.,-26.,-5.,10.,22.,-23.,-12.,0.,6.,-16.,4.,-19.,6.,
     *18.,-10.,-17.,0.,-21.,16.,7.,-4.,-5.,10.,11.,-3.,1.,0.,1.,1.,3.,
     *4.,-4.,-1.,-1.,3.,1.,-5.,39*0./
c
      DATA G80/0.,-29992.,-1956.,-1997.,3027.,1663.,1281.,-2180.,1251.,
     *833.,938.,782.,398.,-419.,199.,-218.,357.,261.,-74.,-162.,-48.,
     *48.,66.,42.,-192.,4.,14.,-108.,72.,-59.,2.,21.,-12.,1.,11.,-2.,
     *18.,6.,0.,-11.,-7.,4.,3.,6.,-1.,5.,10.,1.,-12.,9.,-3.,-1.,7.,2.,
     *-5.,-4.,-4.,2.,-5.,-2.,5.,3.,1.,2.,3.,0.,39*0./
      DATA H80/0.,0.,5604.,0.,-2129.,-200.,0.,-336.,271.,-252.,0.,212.,
     *-257.,53.,-297.,0.,46.,150.,-151.,-78.,92.,0.,-15.,93.,71.,-43.,
     *-2.,17.,0.,-82.,-27.,-5.,16.,18.,-23.,-10.,0.,7.,-18.,4.,-22.,9.,
     *16.,-13.,-15.,0.,-21.,16.,9.,-5.,-6.,9.,10.,-6.,2.,0.,1.,0.,3.,
     *6.,-4.,0.,-1.,4.,0.,-6.,39*0./
c
      DATA G85/0.,-29873.,-1905.,-2072.,3044.,1687.,1296.,-2208.,1247.,
     *829.,936.,780.,361.,-424.,170.,-214.,355.,253.,-93.,-164.,-46.,
     *53.,65.,51.,-185.,4.,16.,-102.,74.,-62.,3.,24.,-6.,4.,10.,0.,21.,
     *6.,0.,-11.,-9.,4.,4.,4.,-4.,5.,10.,1.,-12.,9.,-3.,-1.,7.,1.,-5.,
     *-4.,-4.,3.,-5.,-2.,5.,3.,1.,2.,3.,0.,39*0./
      DATA H85/0.,0.,5500.,0.,-2197.,-306.,0.,-310.,284.,-297.,0.,232.,
     *-249.,69.,-297.,0.,47.,150.,-154.,-75.,95.,0.,-16.,88.,69.,-48.,
     *-1.,21.,0.,-83.,-27.,-2.,20.,17.,-23.,-7.,0.,8.,-19.,5.,-23.,11.,
     *14.,-15.,-11.,0.,-21.,15.,9.,-6.,-6.,9.,9.,-7.,2.,0.,1.,0.,3.,
     *6.,-4.,0.,-1.,4.,0.,-6.,39*0./
c
      DATA G90/0., -29775.,  -1848.,  -2131.,   3059.,   1686.,   1314.,
     *     -2239.,   1248.,    802.,    939.,    780.,    325.,   -423.,
     *       141.,   -214.,    353.,    245.,   -109.,   -165.,    -36.,
     *        61.,     65.,     59.,   -178.,      3.,     18.,    -96.,
     *        77.,    -64.,      2.,     26.,     -1.,      5.,      9.,
     *         0.,     23.,      5.,     -1.,    -10.,    -12.,      3.,
     *         4.,      2.,     -6.,      4.,      9.,      1.,    -12.,
     *         9.,     -4.,     -2.,      7.,      1.,     -6.,     -3.,
     *        -4.,      2.,     -5.,     -2.,      4.,      3.,      1.,
     *         3.,      3.,      0.,  39*0./
C
      DATA H90/0.,      0.,   5406.,      0.,  -2279.,   -373.,      0.,
     *      -284.,    293.,   -352.,      0.,    247.,   -240.,     84.,
     *      -299.,      0.,     46.,    154.,   -153.,    -69.,     97.,
     *         0.,    -16.,     82.,     69.,    -52.,      1.,     24.,
     *         0.,    -80.,    -26.,      0.,     21.,     17.,    -23.,
     *        -4.,      0.,     10.,    -19.,      6.,    -22.,     12.,
     *        12.,    -16.,    -10.,      0.,    -20.,     15.,     11.,
     *        -7.,     -7.,      9.,      8.,     -7.,      2.,      0.,
     *         2.,      1.,      3.,      6.,     -4.,      0.,     -2.,
     *         3.,     -1.,     -6.,   39*0./
C
      DATA G95/0., -29692.,  -1784.,  -2200.,   3070.,   1681.,   1335.,
     *     -2267.,   1249.,    759.,    940.,    780.,    290.,   -418.,
     *       122.,   -214.,    352.,    235.,   -118.,   -166.,    -17.,
     *        68.,     67.,     68.,   -170.,     -1.,     19.,    -93.,
     *        77.,    -72.,      1.,     28.,      5.,      4.,      8.,
     *        -2.,     25.,      6.,     -6.,     -9.,    -14.,      9.,
     *         6.,     -5.,     -7.,      4.,      9.,      3.,    -10.,
     *         8.,     -8.,     -1.,     10.,     -2.,     -8.,     -3.,
     *        -6.,      2.,     -4.,     -1.,      4.,      2.,      2.,
     *         5.,      1.,      0.,    39*0./
C
      DATA H95/0.,      0.,   5306.,      0.,  -2366.,   -413.,      0.,
     *      -262.,    302.,   -427.,      0.,    262.,   -236.,     97.,
     *      -306.,      0.,     46.,    165.,   -143.,    -55.,    107.,
     *         0.,    -17.,     72.,     67.,    -58.,      1.,     36.,
     *         0.,    -69.,    -25.,      4.,     24.,     17.,    -24.,
     *        -6.,      0.,     11.,    -21.,      8.,    -23.,     15.,
     *        11.,    -16.,    -4.,      0.,    -20.,     15.,     12.,
     *        -6.,     -8.,      8.,      5.,     -8.,      3.,      0.,
     *         1.,      0.,      4.,      5.,     -5.,     -1.,     -2.,
     *         1.,     -2.,     -7.,    39*0./
C
      DATA G00/0.,-29619.4, -1728.2, -2267.7,  3068.4,  1670.9,  1339.6,
     *     -2288.,  1252.1,   714.5,   932.3,   786.8,    250.,   -403.,
     *      111.3,  -218.8,   351.4,   222.3,  -130.4,  -168.6,   -12.9,
     *       72.3,    68.2,    74.2,  -160.9,    -5.9,    16.9,   -90.4,
     *       79.0,   -74.0,      0.,    33.3,     9.1,     6.9,     7.3,
     *       -1.2,    24.4,     6.6,    -9.2,    -7.9,   -16.6,     9.1,
     *        7.0,    -7.9,     -7.,      5.,     9.4,      3.,   - 8.4,
     *        6.3,    -8.9,    -1.5,     9.3,    -4.3,    -8.2,    -2.6,
     *        -6.,     1.7,    -3.1,    -0.5,     3.7,      1.,      2.,
     *        4.2,     0.3,    -1.1,     2.7,    -1.7,    -1.9,     1.5,
     *       -0.1,     0.1,    -0.7,     0.7,     1.7,     0.1,     1.2,
     *        4.0,    -2.2,    -0.3,     0.2,     0.9,    -0.2,     0.9,
     *       -0.5,     0.3,    -0.3,    -0.4,    -0.1,    -0.2,    -0.4,
     *       -0.2,    -0.9,     0.3,     0.1,    -0.4,     1.3,    -0.4,
     *        0.7,    -0.4,     0.3,    -0.1,     0.4,      0.,     0.1/
C
      DATA H00/0.,      0.,  5186.1,      0., -2481.6,  -458.0,      0.,
     *     -227.6,   293.4,  -491.1,      0.,   272.6,  -231.9,   119.8,
     *     -303.8,      0.,    43.8,   171.9,  -133.1,   -39.3,   106.3,
     *         0.,   -17.4,    63.7,    65.1,   -61.2,     0.7,    43.8,
     *         0.,   -64.6,   -24.2,     6.2,     24.,    14.8,   -25.4,
     *       -5.8,     0.0,    11.9,   -21.5,     8.5,   -21.5,    15.5,
     *        8.9,   -14.9,    -2.1,     0.0,   -19.7,    13.4,    12.5,
     *       -6.2,    -8.4,     8.4,     3.8,    -8.2,     4.8,     0.0,
     *        1.7,     0.0,     4.0,     4.9,    -5.9,    -1.2,    -2.9,
     *        0.2,    -2.2,    -7.4,     0.0,     0.1,     1.3,    -0.9,
     *       -2.6,     0.9,    -0.7,    -2.8,    -0.9,    -1.2,    -1.9,
     *       -0.9,     0.0,    -0.4,     0.3,     2.5,    -2.6,     0.7,
     *        0.3,     0.0,     0.0,     0.3,    -0.9,    -0.4,     0.8,
     *        0.0,    -0.9,     0.2,     1.8,    -0.4,    -1.0,    -0.1,
     *        0.7,     0.3,     0.6,     0.3,    -0.2,    -0.5,    -0.9/
C
      DATA G05/0.,-29554.6, -1669.0, -2337.2,  3047.7,  1657.8,  1336.3,
     *    -2305.8,  1246.4,   672.5,   920.6,   798.0,   210.7,  -379.9,
     *      100.0,  -227.0,   354.4,   208.9,  -136.5,  -168.1,   -13.6,
     *       73.6,    69.6,    76.7,  -151.3,   -14.6,    14.6,   -86.4,
     *       79.9,   -74.5,    -1.7,    38.7,    12.3,     9.4,     5.4,
     *        1.9,    24.8,     7.6,   -11.7,    -6.9,   -18.1,    10.2,
     *        9.4,   -11.3,    -4.9,     5.6,     9.8,     3.6,    -6.9,
     *        5.0,   -10.8,    -1.3,     8.8,    -6.7,    -9.2,    -2.2,
     *       -6.1,     1.4,    -2.4,    -0.2,     3.1,     0.3,     2.1,
     *        3.8,    -0.2,    -2.1,     2.9,    -1.6,    -1.9,     1.4,
     *       -0.3,     0.3,    -0.8,     0.5,     1.8,     0.2,     1.0,
     *        4.0,    -2.2,    -0.3,     0.2,     0.9,    -0.4,     1.0,
     *       -0.3,     0.5,    -0.4,    -0.4,     0.1,    -0.5,    -0.1,
     *       -0.2,    -0.9,     0.3,     0.3,    -0.4,     1.2,    -0.4,
     *        0.8,    -0.3,     0.4,    -0.1,     0.4,    -0.1,    -0.2/
C
      DATA H05/0.,     0.0,  5078.0,     0.0, -2594.5,  -515.4,     0.0,
     *     -198.9,   269.7,  -524.7,     0.0,   282.1,  -225.2,   145.2,
     *     -305.4,     0.0,    42.7,   180.3,  -123.5,   -19.6,   103.9,
     *        0.0,   -20.3,    54.8,    63.6,   -63.5,     0.2,    50.9,
     *        0.0,   -61.1,   -22.6,     6.8,    25.4,    10.9,   -26.3,
     *       -4.6,     0.0,    11.2,   -20.9,     9.8,   -19.7,    16.2,
     *        7.6,   -12.8,    -0.1,     0.0,   -20.1,    12.7,    12.7,
     *       -6.7,    -8.2,     8.1,     2.9,    -7.7,     6.0,     0.0,
     *        2.2,     0.1,     4.5,     4.8,    -6.7,    -1.0,    -3.5,
     *       -0.9,    -2.3,    -7.9,     0.0,     0.3,     1.4,    -0.8,
     *       -2.3,     0.9,    -0.6,    -2.7,    -1.1,    -1.6,    -1.9,
     *       -1.4,     0.0,    -0.6,     0.2,     2.4,    -2.6,     0.6,
     *        0.4,     0.0,     0.0,     0.3,    -0.9,    -0.3,     0.9,
     *        0.0,    -0.8,     0.3,     1.7,    -0.5,    -1.1,     0.0,
     *        0.6,     0.2,     0.5,     0.4,    -0.2,    -0.6,    -0.9/
C
      DATA G10/0.00,-29496.57,-1586.42,-2396.06,3026.34,1668.17,1339.85,
     *     -2326.54,  1232.10,  633.73,  912.66, 808.97, 166.58,-356.83,
     *        89.40,  -230.87,  357.29,  200.26,-141.05,-163.17,  -8.03,
     *        72.78,    68.69,   75.92, -141.40, -22.83,  13.10, -78.09,
     *        80.44,   -75.00,   -4.55,   45.24,  14.00,  10.46,   1.64,
     *         4.92,    24.41,    8.21,  -14.50,  -5.59, -19.34,  11.61,
     *        10.85,   -14.05,   -3.54,    5.50,   9.45,   3.45,  -5.27,
     *         3.13,   -12.38,   -0.76,    8.43,  -8.42, -10.08,  -1.94,
     *        -6.24,     0.89,   -1.07,   -0.16,   2.45,  -0.33,   2.13,
     *         3.09,    -1.03,   -2.80,    3.05,  -1.48,  -2.03,   1.65,
     *        -0.51,     0.54,   -0.79,    0.37,   1.79,   0.12,   0.75,
     *         3.75,    -2.12,   -0.21,    0.30,   1.04,  -0.63,   0.95,
     *        -0.11,     0.52,   -0.39,   -0.37,   0.21,  -0.77,   0.04,
     *        -0.09,    -0.89,    0.31,    0.42,  -0.45,   1.08,  -0.31,
     *         0.78,    -0.18,    0.38,    0.02,   0.42,  -0.26,  -0.26/
C
      DATA H10/0.00,  0.00, 4944.26,    0.00,-2708.54, -575.73,    0.00,
     *      -160.40,251.75, -537.03,    0.00,  286.48, -211.03,  164.46,
     *      -309.72,  0.00,   44.58,  189.01, -118.06,   -0.01,  101.04,
     *         0.00,-20.90,   44.18,   61.54,  -66.26,    3.02,   55.40,
     *         0.00,-57.80,  -21.20,    6.54,   24.96,    7.03,  -27.61,
     *        -3.28,  0.00,   10.84,  -20.03,   11.83,  -17.41,   16.71,
     *         6.96,-10.74,    1.64,    0.00,  -20.54,   11.51,   12.75,
     *        -7.14, -7.42,    7.97,    2.14,   -6.08,    7.01,    0.00,
     *         2.73, -0.10,    4.71,    4.44,   -7.22,   -0.96,   -3.95,
     *        -1.99, -1.97,   -8.31,    0.00,    0.13,    1.67,   -0.66,
     *        -1.76,  0.85,   -0.39,   -2.51,   -1.27,   -2.11,   -1.94,
     *        -1.86,  0.00,   -0.87,    0.27,    2.13,   -2.49,    0.49,
     *         0.59,  0.00,    0.13,    0.27,   -0.86,   -0.23,    0.87,
     *         0.00, -0.87,    0.30,    1.66,   -0.59,   -1.14,   -0.07,
     *         0.54,  0.10,    0.49,    0.44,   -0.25,   -0.53,   -0.79/
C
      DATA G15/0.00,-29441.46,-1501.77,-2445.88,3012.20,1676.35,1350.33,
     *     -2352.26,  1225.85,  581.69,  907.42, 813.68, 120.49,-334.85,
     *        70.38,  -232.91,  360.14,  192.35,-140.94,-157.40,   4.30,
     *        69.55,    67.57,   72.79, -129.85, -28.93,  13.14, -70.85,
     *        81.29,   -75.99,   -6.79,   51.82,  15.07,   9.32,  -2.88,
     *         6.61,    23.98,    8.89,  -16.78,  -3.16, -20.56,  13.33,
     *        11.76,   -15.98,   -2.02,    5.33,   8.83,   3.02,  -3.22,
     *         0.67,   -13.20,   -0.10,    8.68,  -9.06, -10.54,  -2.01,
     *        -6.26,     0.17,    0.55,   -0.55,   1.70,  -0.67,   2.13,
     *         2.33,    -1.80,   -3.59,    3.00,  -1.40,  -2.30,   2.08,
     *        -0.79,     0.58,   -0.70,    0.14,   1.70,  -0.22,   0.44,
     *         3.49,    -2.09,   -0.16,    0.46,   1.23,  -0.89,   0.85,
     *         0.10,     0.54,   -0.37,   -0.43,   0.22,  -0.94,  -0.03,
     *        -0.02,    -0.92,    0.42,    0.63,  -0.42,   0.96,  -0.19,
     *         0.81,    -0.13,    0.38,    0.08,   0.46,  -0.35,  -0.36/
c
      DATA H15/0.00,   0.00,  4795.99,    0.00,-2845.41,-642.17,   0.00,
     *      -115.29, 245.04,  -538.70,    0.00,  283.54,-188.43, 180.95,
     *      -329.23,   0.00,    46.98,  196.98, -119.14,  15.98, 100.12,
     *         0.00, -20.61,    33.30,   58.74,  -66.64,   7.35,  62.41,
     *         0.00, -54.27,   -19.53,    5.59,   24.45,   3.27, -27.50,
     *        -2.32,   0.00,    10.04,  -18.26,   13.18, -14.60,  16.16,
     *         5.69,  -9.10,     2.26,    0.00,  -21.77,  10.76,  11.74,
     *        -6.74,  -6.88,     7.79,    1.04,   -3.89,   8.44,   0.00,
     *         3.28,  -0.40,     4.55,    4.40,   -7.92,  -0.61,  -4.16,
     *        -2.85,  -1.12,    -8.72,    0.00,    0.00,   2.11,  -0.60,
     *        -1.05,   0.76,    -0.20,   -2.12,   -1.44,  -2.57,  -2.01,
     *        -2.34,   0.00,    -1.08,    0.37,    1.75,  -2.19,   0.27,
     *         0.72,  -0.09,     0.29,    0.23,   -0.89,  -0.16,   0.72,
     *         0.00,  -0.88,     0.49,    1.56,   -0.50,  -1.24,  -0.10,
     *         0.42,  -0.04,     0.48,    0.48,   -0.30,  -0.43,  -0.71/
c
      DATA G20/0.0,-29403.41,-1451.37,-2499.78,2981.96,1676.85,1363.00,
     *-2380.80,1236.06,525.60,902.82,809.47,86.18,-309.47,47.44,-234.42,
     *363.26,187.86,-140.73,-151.16,13.98,65.97,65.56,72.96,-121.57,
     *-36.06,13.60,-64.80,80.54,-76.63,-8.23,56.45,15.80,6.30,-7.21,
     *9.77,23.66,9.74,-17.49,-0.49,-21.07,15.28,13.65,-16.59,-0.34,5.03,
     *8.36,2.84,-1.48,-1.14,-13.22,1.08,8.82,-9.23,-11.86,-1.84,-6.25,
     *-0.11,1.66,-.86,0.65,-0.88,1.88,1.44,-2.38,-3.84,2.96,-1.36,-2.51,
     *2.31,-0.85,0.28,-0.66,-0.07,1.44,-0.59,0.18,3.09,-2.00,-0.13,0.43,
     *1.28,-1.14,0.71,0.31,0.49,-0.26,-0.47,0.09,-1.13,-0.33,0.08,-0.93,
     *0.53,0.72,-0.30,0.75,-0.01,0.76,-0.05,0.37,0.13,0.45,-0.46,-0.40/
c
      DATA H20/0.0,0.0,4653.35,0.0,-2991.72,-734.62,0.0,-81.96,241.80,
     *-542.52,0.0,282.10,-158.5,199.75,-350.3,0.0,47.52,208.36,-121.43,
     *32.09,99.14,0.0,-19.22,25.02,52.76,-64.40,8.96,68.04,0.0,-51.5,
     *-16.85,2.36,23.56,-2.19,-27.19,-1.90,0.0,8.43,-15.23,12.83,-11.76,
     *14.94,3.62,-6.90,2.90,0.00,-23.44,11.04,9.86,-5.13,-6.20,7.79,0.4,
     *-1.44,9.60,0.0,3.38,-0.18,3.50,4.86,-8.62,-0.11,-4.26,-3.43,-0.10,
     *-8.84,0.00,-0.02,2.50,-0.55,-0.39,0.62,-0.21,-1.66,-1.60,-2.98,
     *-1.97,-2.51,0.00,-1.15,0.52,1.37,-1.81,0.08,0.71,-0.15,0.55,0.16,
     *-0.93,-.04,0.52,0.0,-0.88,0.64,1.40,-0.38,-1.31,-0.09, 0.29,-0.11,
     *0.47,0.54,-0.41,-0.36,-0.60/
C        
     DATA G25/0.0,-29350.0,-1410.3,-2556.2,2950.9,1648.7,1360.9,-2404.2,
     *1243.8,453.4,894.7,799.6,55.8,-281.1,12.0,-232.9,369.0,187.2,
     *-138.7,-141.9,20.9,64.3,63.8,76.7,-115.7,-40.9,14.9,-60.8,79.6,
     *-76.9,-8.8,59.3,15.8,2.5,-11.2,14.3,23.1,10.9,-17.5,2.0,-21.8,
     *16.9,14.9,-16.8,1.0,4.7,8.0,3.0,-.2,-2.5,-13.1,2.4,8.6,-8.7,-12.8,
     *-1.3,-6.4,0.2,2.0,-1.0,-0.5,-0.9,1.5,0.9,-2.6,-3.9,3.0,-1.4,-2.5,
     *2.4,-0.6,0.0,-0.6,-0.1,1.1,-1.0,-0.1,2.6,-2.0,-0.1,0.4,1.2,-1.2,
     *0.6,0.5,0.5,-0.1,-0.5,-0.2,-1.2,-0.7,0.2,-0.9,0.6,0.7,-0.2,0.5,
     *0.1,0.7,0.0,0.3,0.2,0.4,-0.5,-0.4/

      DATA H25/0.0,0.0,4545.5,0.0,-3133.6,-814.2,0.0,-56.9,237.6,-549.6,
     *0.0,278.6,-134.0,212.0,-375.4,0.0,45.3,220.0,-122.9,42.9,106.2,
     *0.0,-18.4,16.8,48.9,-59.8,10.9,72.8,0.0,-48.9,-14.4,-1.0,23.5,
     *-7.4,-25.1,-2.2,0.0,7.2,-12.6,11.5,-9.7,12.7,0.7,-5.2,3.9,0.0,
     *-24.8,12.1,8.3,-3.4,-5.3,7.2,-0.6,0.8,9.8,0.0,3.3,0.1,2.5,5.4,
     *-9.0,0.4,-4.2,-3.8,0.9,-9.0,0.0,0.0,2.8,-0.6,0.1,0.5,-0.3,-1.2,
     *-1.7,-2.9,-1.8,-2.3,0.0,-1.2,0.6,1.0,-1.5,0.0,0.6,-0.2,0.8,0.1,
     *-0.9,0.1,0.2,0.0,-0.9,0.7,1.2,-0.3,-1.3,-0.1,0.2,-0.2,0.5,0.6,
     *-0.6,-0.3,-0.5/

      DATA DG25/0.0,12.6,10.0,-11.2,-5.3,-8.3,-1.5,-4.4,0.4,-15.6,-1.7,
     *-2.3,-5.8,5.4,-6.8,0.6,1.3,0.0,0.7,2.3,1.0,-0.2,-0.3,0.8,1.2,-0.8,
     *0.4,0.9,-0.1,-0.1,-0.1,0.5,-0.1,-0.8,-0.8,0.9,-0.1,0.2,0.0,0.4,
     *-0.1,0.3,0.1,0.0,0.3/
c
      DATA DH25/0.0,0.0,-21.5,0.0,-27.3,-11.1,0.0,3.8,-.2,-3.9,0.0,-1.3,
     *4.1,1.6,-4.1,0.0,-0.5,2.1,0.5,1.7,1.9,0.0,0.3,-1.6,-0.4,0.8,0.7,
     *0.9,0.0,0.6,0.5,-0.7,0.0,-0.9,0.5,-0.3,0.0,-0.3,0.4,-0.3,0.4,-0.5,
     *-0.6,0.3,0.2/
c
      IY=IYEAR
C
C  WE ARE RESTRICTED BY THE INTERVAL 1965-2030, FOR WHICH EITHER THE IGRF/DGRF COEFFICIENTS OR SECULAR VELOCITIES
c    ARE KNOWN; IF IYEAR IS OUTSIDE THIS INTERVAL, THEN THE SUBROUTINE USES THE
C      NEAREST LIMITING VALUE AND PRINTS A WARNING:
C
      IF(IY.LT.1965) THEN
       IY=1965
       WRITE (*,10) IYEAR,IY
      ENDIF

      IF(IY.GT.2030) THEN
       IY=2030
       WRITE (*,10) IYEAR,IY
      ENDIF
C
C  CALCULATE THE ARRAY REC, CONTAINING COEFFICIENTS FOR THE RECURSION RELATIONS,
C  USED IN THE IGRF SUBROUTINE FOR CALCULATING THE ASSOCIATE LEGENDRE POLYNOMIALS
C  AND THEIR DERIVATIVES:
c
      DO 20 N=1,14
         N2=2*N-1
         N2=N2*(N2-2)
         DO 20 M=1,N
            MN=N*(N-1)/2+M
20    REC(MN)=FLOAT((N-M)*(N+M-2))/FLOAT(N2)
C
      IF (IY.LT.1970) GOTO 50          !INTERPOLATE BETWEEN 1965 - 1970
      IF (IY.LT.1975) GOTO 60          !INTERPOLATE BETWEEN 1970 - 1975
      IF (IY.LT.1980) GOTO 70          !INTERPOLATE BETWEEN 1975 - 1980
      IF (IY.LT.1985) GOTO 80          !INTERPOLATE BETWEEN 1980 - 1985
      IF (IY.LT.1990) GOTO 90          !INTERPOLATE BETWEEN 1985 - 1990
      IF (IY.LT.1995) GOTO 100         !INTERPOLATE BETWEEN 1990 - 1995
      IF (IY.LT.2000) GOTO 110         !INTERPOLATE BETWEEN 1995 - 2000
      IF (IY.LT.2005) GOTO 120         !INTERPOLATE BETWEEN 2000 - 2005
      IF (IY.LT.2010) GOTO 130         !INTERPOLATE BETWEEN 2005 - 2010
      IF (IY.LT.2015) GOTO 140         !INTERPOLATE BETWEEN 2010 - 2015
      IF (IY.LT.2020) GOTO 150         !INTERPOLATE BETWEEN 2015 - 2020
      IF (IY.LT.2025) GOTO 160         !INTERPOLATE BETWEEN 2020 - 2025
C
C       EXTRAPOLATE BEYOND 2025:
C
      DT=FLOAT(IY)+FLOAT(IDAY-1)/365.25-2025.
      DO 40 N=1,105
         G(N)=G25(N)
         H(N)=H25(N)
         IF (N.GT.45) GOTO 40
         G(N)=G(N)+DG25(N)*DT
         H(N)=H(N)+DH25(N)*DT
40    CONTINUE
      GOTO 300
C
C       INTERPOLATE BETWEEEN 1965 - 1970:
C
50    F2=(FLOAT(IY)+FLOAT(IDAY-1)/365.25-1965)/5.
      F1=1.-F2
      DO 55 N=1,105
         G(N)=G65(N)*F1+G70(N)*F2
55       H(N)=H65(N)*F1+H70(N)*F2
      GOTO 300
C
C       INTERPOLATE BETWEEN 1970 - 1975:
C
60    F2=(FLOAT(IY)+FLOAT(IDAY-1)/365.25-1970)/5.
      F1=1.-F2
      DO 65 N=1,105
         G(N)=G70(N)*F1+G75(N)*F2
65       H(N)=H70(N)*F1+H75(N)*F2
      GOTO 300
C
C       INTERPOLATE BETWEEN 1975 - 1980:
C
70    F2=(FLOAT(IY)+FLOAT(IDAY-1)/365.25-1975)/5.
      F1=1.-F2
      DO 75 N=1,105
         G(N)=G75(N)*F1+G80(N)*F2
75       H(N)=H75(N)*F1+H80(N)*F2
      GOTO 300
C
C       INTERPOLATE BETWEEN 1980 - 1985:
C
80    F2=(FLOAT(IY)+FLOAT(IDAY-1)/365.25-1980)/5.
      F1=1.-F2
      DO 85 N=1,105
         G(N)=G80(N)*F1+G85(N)*F2
85       H(N)=H80(N)*F1+H85(N)*F2
      GOTO 300
C
C       INTERPOLATE BETWEEN 1985 - 1990:
C
90    F2=(FLOAT(IY)+FLOAT(IDAY-1)/365.25-1985)/5.
      F1=1.-F2
      DO 95 N=1,105
         G(N)=G85(N)*F1+G90(N)*F2
95       H(N)=H85(N)*F1+H90(N)*F2
      GOTO 300
C
C       INTERPOLATE BETWEEN 1990 - 1995:
C
100   F2=(FLOAT(IY)+FLOAT(IDAY-1)/365.25-1990)/5.
      F1=1.-F2
      DO 105 N=1,105
         G(N)=G90(N)*F1+G95(N)*F2
105      H(N)=H90(N)*F1+H95(N)*F2
      GOTO 300
C
C       INTERPOLATE BETWEEN 1995 - 2000:
C
110   F2=(FLOAT(IY)+FLOAT(IDAY-1)/365.25-1995)/5.
      F1=1.-F2
      DO 115 N=1,105   !  THE 2000 COEFFICIENTS (G00) GO THROUGH THE ORDER 13, NOT 10
         G(N)=G95(N)*F1+G00(N)*F2
115      H(N)=H95(N)*F1+H00(N)*F2
      GOTO 300
C
C       INTERPOLATE BETWEEN 2000 - 2005:
C
120   F2=(FLOAT(IY)+FLOAT(IDAY-1)/365.25-2000)/5.
      F1=1.-F2
      DO 125 N=1,105
         G(N)=G00(N)*F1+G05(N)*F2
125      H(N)=H00(N)*F1+H05(N)*F2
      GOTO 300
C
C       INTERPOLATE BETWEEN 2005 - 2010:
C
130   F2=(FLOAT(IY)+FLOAT(IDAY-1)/365.25-2005)/5.
      F1=1.-F2
      DO 135 N=1,105
         G(N)=G05(N)*F1+G10(N)*F2
135      H(N)=H05(N)*F1+H10(N)*F2
      GOTO 300
C
C       INTERPOLATE BETWEEN 2010 - 2015:
C
140   F2=(FLOAT(IY)+FLOAT(IDAY-1)/365.25-2010)/5.
      F1=1.-F2
      DO 145 N=1,105
         G(N)=G10(N)*F1+G15(N)*F2
145      H(N)=H10(N)*F1+H15(N)*F2
      GOTO 300
C
C       INTERPOLATE BETWEEN 2015 - 2020:
C
150   F2=(FLOAT(IY)+FLOAT(IDAY-1)/365.25-2015.0)/5.
      F1=1.-F2
      DO 155 N=1,105
         G(N)=G15(N)*F1+G20(N)*F2
155      H(N)=H15(N)*F1+H20(N)*F2
      GOTO 300
C
C       INTERPOLATE BETWEEN 2020 - 2025:
C
160   F2=(FLOAT(IY)+FLOAT(IDAY-1)/365.25-2020)/5.
      F1=1.-F2
      DO 165 N=1,105
         G(N)=G20(N)*F1+G25(N)*F2
165      H(N)=H20(N)*F1+H25(N)*F2
      GOTO 300
c
C   COEFFICIENTS FOR A GIVEN YEAR HAVE BEEN CALCULATED; NOW MULTIPLY
C   THEM BY SCHMIDT NORMALIZATION FACTORS:
C
300   S=1.
      DO 250 N=2,14
         MN=N*(N-1)/2+1
         S=S*FLOAT(2*N-3)/FLOAT(N-1)
         G(MN)=G(MN)*S
         H(MN)=H(MN)*S
         P=S
         DO 250 M=2,N
            AA=1.
            IF (M.EQ.2) AA=2.
            P=P*SQRT(AA*FLOAT(N-M+1)/FLOAT(N+M-2))
            MNN=MN+M-1
            G(MNN)=G(MNN)*P
250         H(MNN)=H(MNN)*P

           G_10=-G(2)
           G_11= G(3)
           H_11= H(3)
C
C  NOW CALCULATE GEO COMPONENTS OF THE UNIT VECTOR EzMAG, PARALLEL TO GEODIPOLE AXIS:
C   SIN(TETA0)*COS(LAMBDA0), SIN(TETA0)*SIN(LAMBDA0), AND COS(TETA0)
C         ST0 * CL0                ST0 * SL0                CT0
C
      SQ=G_11**2+H_11**2
      SQQ=SQRT(SQ)
      SQR=SQRT(G_10**2+SQ)
      SL0=-H_11/SQQ
      CL0=-G_11/SQQ
      ST0=SQQ/SQR
      CT0=G_10/SQR
      STCL=ST0*CL0
      STSL=ST0*SL0
      CTSL=CT0*SL0
      CTCL=CT0*CL0
C
C  NOW CALCULATE GEI COMPONENTS (S1,S2,S3) OF THE UNIT VECTOR S = EX_GSE
C    POINTING FROM THE EARTH'S CENTER TO SUN
C
      CALL SUN_08 (IY,IDAY,IHOUR,MIN,ISEC,GST,SLONG,SRASN,SDEC)
C
      S1=COS(SRASN)*COS(SDEC)
      S2=SIN(SRASN)*COS(SDEC)
      S3=SIN(SDEC)
C
C  NOW CALCULATE GEI COMPONENTS (DZ1,DZ2,DZ3) OF THE UNIT VECTOR EZGSE
C  POINTING NORTHWARD AND ORTHOGONAL TO THE ECLIPTIC PLANE, AS
C  (0,-SIN(OBLIQ),COS(OBLIQ)). FOR THE EPOCH 1978, OBLIQ = 23.44214 DEGS.
C  HERE WE USE A MORE ACCURATE TIME-DEPENDENT VALUE, DETERMINED AS:
C
      DJ=FLOAT(365*(IY-1900)+(IY-1901)/4 +IDAY)
     * -0.5+FLOAT(IHOUR*3600+MIN*60+ISEC)/86400.
      T=DJ/36525.
      OBLIQ=(23.45229-0.0130125*T)/57.2957795
      DZ1=0.
      DZ2=-SIN(OBLIQ)
      DZ3=COS(OBLIQ)
C
C  NOW OBTAIN GEI COMPONENTS OF THE UNIT VECTOR EYGSE=(DY1,DY2,DY3),
C  COMPLETING THE RIGHT-HANDED SYSTEM. THEY CAN BE FOUND FROM THE VECTOR
C  PRODUCT EZGSE x EXGSE = (DZ1,DZ2,DZ3) x (S1,S2,S3):
C
      DY1=DZ2*S3-DZ3*S2
      DY2=DZ3*S1-DZ1*S3
      DY3=DZ1*S2-DZ2*S1
C
C  NOW CALCULATE GEI COMPONENTS OF THE UNIT VECTOR X = EXGSW, DIRECTED ANTIPARALLEL
C  TO THE OBSERVED SOLAR WIND FLOW. FIRST, CALCULATE ITS COMPONENTS IN GSE:
C
      V=SQRT(VGSEX**2+VGSEY**2+VGSEZ**2)
      DX1=-VGSEX/V
      DX2=-VGSEY/V
      DX3=-VGSEZ/V
C
C  THEN IN GEI:
C
      X1=DX1*S1+DX2*DY1+DX3*DZ1
      X2=DX1*S2+DX2*DY2+DX3*DZ2
      X3=DX1*S3+DX2*DY3+DX3*DZ3
C
C  NOW CALCULATE GEI COMPONENTS (DIP1,DIP2,DIP3) OF THE UNIT VECTOR DIP = EZ_SM = EZ_MAG,
C   ALIGNED WITH THE GEODIPOLE AND POINTING NORTHWARD FROM ECLIPTIC PLANE:
C
      CGST=COS(GST)
      SGST=SIN(GST)
C
      DIP1=STCL*CGST-STSL*SGST
      DIP2=STCL*SGST+STSL*CGST
      DIP3=CT0
C
C  THIS ALLOWS US TO CALCULATE GEI COMPONENTS OF THE UNIT VECTOR Y = EYGSW
C   BY TAKING THE VECTOR PRODUCT DIP x X AND NORMALIZING IT TO UNIT LENGTH:
C
      Y1=DIP2*X3-DIP3*X2
      Y2=DIP3*X1-DIP1*X3
      Y3=DIP1*X2-DIP2*X1
      Y=SQRT(Y1*Y1+Y2*Y2+Y3*Y3)
      Y1=Y1/Y
      Y2=Y2/Y
      Y3=Y3/Y
C
C   AND GEI COMPONENTS OF THE UNIT VECTOR Z = EZGSW = EXGSW x EYGSW = X x Y:
C
      Z1=X2*Y3-X3*Y2
      Z2=X3*Y1-X1*Y3
      Z3=X1*Y2-X2*Y1
C
C   ELEMENTS OF THE MATRIX GSE TO GSW ARE THE SCALAR PRODUCTS:
C
C  E11=(EXGSE,EXGSW)  E12=(EXGSE,EYGSW)  E13=(EXGSE,EZGSW)
C  E21=(EYGSE,EXGSW)  E22=(EYGSE,EYGSW)  E23=(EYGSE,EZGSW)
C  E31=(EZGSE,EXGSW)  E32=(EZGSE,EYGSW)  E33=(EZGSE,EZGSW)
C
      E11= S1*X1 +S2*X2 +S3*X3
      E12= S1*Y1 +S2*Y2 +S3*Y3
      E13= S1*Z1 +S2*Z2 +S3*Z3
      E21=DY1*X1+DY2*X2+DY3*X3
      E22=DY1*Y1+DY2*Y2+DY3*Y3
      E23=DY1*Z1+DY2*Z2+DY3*Z3
      E31=DZ1*X1+DZ2*X2+DZ3*X3
      E32=DZ1*Y1+DZ2*Y2+DZ3*Y3
      E33=DZ1*Z1+DZ2*Z2+DZ3*Z3
C
C   GEODIPOLE TILT ANGLE IN THE GSW SYSTEM: PSI=ARCSIN(DIP,EXGSW)
C
      SPS=DIP1*X1+DIP2*X2+DIP3*X3
      CPS=SQRT(1.-SPS**2)
      PSI=ASIN(SPS)
C
C   ELEMENTS OF THE MATRIX GEO TO GSW ARE THE SCALAR PRODUCTS:
C
C   A11=(EXGEO,EXGSW), A12=(EYGEO,EXGSW), A13=(EZGEO,EXGSW),
C   A21=(EXGEO,EYGSW), A22=(EYGEO,EYGSW), A23=(EZGEO,EYGSW),
C   A31=(EXGEO,EZGSW), A32=(EYGEO,EZGSW), A33=(EZGEO,EZGSW),
C
C   ALL THE UNIT VECTORS IN BRACKETS ARE ALREADY DEFINED IN GEI:
C
C  EXGEO=(CGST,SGST,0), EYGEO=(-SGST,CGST,0), EZGEO=(0,0,1)
C  EXGSW=(X1,X2,X3),  EYGSW=(Y1,Y2,Y3),   EZGSW=(Z1,Z2,Z3)
C                                                           AND  THEREFORE:
C
      A11=X1*CGST+X2*SGST
      A12=-X1*SGST+X2*CGST
      A13=X3
      A21=Y1*CGST+Y2*SGST
      A22=-Y1*SGST+Y2*CGST
      A23=Y3
      A31=Z1*CGST+Z2*SGST
      A32=-Z1*SGST+Z2*CGST
      A33=Z3
C
C  NOW CALCULATE ELEMENTS OF THE MATRIX MAG TO SM (ONE ROTATION ABOUT THE GEODIPOLE AXIS);
C   THEY ARE FOUND AS THE SCALAR PRODUCTS: CFI=GM22=(EYSM,EYMAG)=(EYGSW,EYMAG),
C                                          SFI=GM23=(EYSM,EXMAG)=(EYGSW,EXMAG),
C    DERIVED AS FOLLOWS:
C
C IN GEO, THE VECTORS EXMAG AND EYMAG HAVE THE COMPONENTS (CT0*CL0,CT0*SL0,-ST0)
C  AND (-SL0,CL0,0), RESPECTIVELY.    HENCE, IN GEI THEIR COMPONENTS ARE:
C  EXMAG:    CT0*CL0*COS(GST)-CT0*SL0*SIN(GST)
C            CT0*CL0*SIN(GST)+CT0*SL0*COS(GST)
C            -ST0
C  EYMAG:    -SL0*COS(GST)-CL0*SIN(GST)
C            -SL0*SIN(GST)+CL0*COS(GST)
C             0
C  NOW, NOTE THAT GEI COMPONENTS OF EYSM=EYGSW WERE FOUND ABOVE AS Y1, Y2, AND Y3,
C  AND WE ONLY HAVE TO COMBINE THESE QUANTITIES INTO SCALAR PRODUCTS:
C
      EXMAGX=CT0*(CL0*CGST-SL0*SGST)
      EXMAGY=CT0*(CL0*SGST+SL0*CGST)
      EXMAGZ=-ST0
      EYMAGX=-(SL0*CGST+CL0*SGST)
      EYMAGY=-(SL0*SGST-CL0*CGST)
      CFI=Y1*EYMAGX+Y2*EYMAGY
      SFI=Y1*EXMAGX+Y2*EXMAGY+Y3*EXMAGZ
C
 10   FORMAT(//1X,
     *'**** RECALC_08 WARNS: YEAR IS OUT OF INTERVAL 1965-2025: IYEAR=',
     *I4,/,6X,'CALCULATIONS WILL BE DONE FOR IYEAR=',I4,/)
      RETURN
      END
c
c==================================================================================

      SUBROUTINE GSWGSE_08 (XGSW,YGSW,ZGSW,XGSE,YGSE,ZGSE,J)
C
C  THIS SUBROUTINE TRANSFORMS COMPONENTS OF ANY VECTOR BETWEEN THE STANDARD GSE
C  COORDINATE SYSTEM AND THE GEOCENTRIC SOLAR-WIND (GSW, aka GSWM), DEFINED AS FOLLOWS
C  (HONES ET AL., PLANET.SPACE SCI., V.34, P.889, 1986; TSYGANENKO ET AL., JGRA,
C  V.103(A4), P.6827, 1998):
C
C  IN THE GSW SYSTEM, X AXIS IS ANTIPARALLEL TO THE OBSERVED DIRECTION OF THE SOLAR WIND FLOW.
C  TWO OTHER AXES, Y AND Z, ARE DEFINED IN THE SAME WAY AS FOR THE STANDARD GSM, THAT IS,
C  Z AXIS ORTHOGONAL TO X AXIS, POINTS NORTHWARD, AND LIES IN THE PLANE DEFINED BY THE X-
C  AND GEODIPOLE AXIS. THE Y AXIS COMPLETES THE RIGHT-HANDED SYSTEM.
C
C  THE GSW SYSTEM BECOMES IDENTICAL TO THE STANDARD GSM IN THE CASE OF
C   A STRICTLY RADIAL SOLAR WIND FLOW.
C
C  AUTHOR:  N. A. TSYGANENKO
C  ADDED TO 2008 VERSION OF GEOPACK: JAN 27, 2008.
C
C                    J>0                       J<0
C-----INPUT:   J,XGSW,YGSW,ZGSW          J,XGSE,YGSE,ZGSE
C-----OUTPUT:    XGSE,YGSE,ZGSE            XGSW,YGSW,ZGSW
C
C  IMPORTANT THINGS TO REMEMBER:
C
C   (1) BEFORE CALLING GSWGSE_08, BE SURE TO INVOKE SUBROUTINE RECALC_08, IN ORDER
C       TO DEFINE ALL NECESSARY ELEMENTS OF TRANSFORMATION MATRICES
C
C   (2) IN THE ABSENCE OF INFORMATION ON THE SOLAR WIND DIRECTION, E.G., WITH ONLY SCALAR
C       SPEED V KNOWN, THIS SUBROUTINE CAN BE USED TO CONVERT VECTORS TO ABERRATED
C       COORDINATE SYSTEM, TAKING INTO ACCOUNT EARTH'S ORBITAL SPEED OF 29 KM/S.
C       TO DO THAT, SPECIFY THE LAST 3 PARAMETERS IN RECALC_08 AS FOLLOWS:
C       VGSEX=-V, VGSEY=29.0, VGSEZ=0.0.
C
C       IT SHOULD ALSO BE KEPT IN MIND THAT IN SOME SOLAR WIND DATABASES THE ABERRATION
C       EFFECT HAS ALREADY BEEN TAKEN INTO ACCOUNT BY SUBTRACTING 29 KM/S FROM VYGSE;
C       IN THAT CASE, THE ORIGINAL VYGSE VALUES SHOULD BE RESTORED BY ADDING BACK THE
C       29 KM/S CORRECTION. WHETHER OR NOT TO DO THAT, MUST BE VERIFIED WITH THE DATA
C       ORIGINATOR (OR CAN BE DETERMINED BY CALCULATING THE AVERAGE VGSEY OVER
C       A SUFFICIENTLY LONG TIME INTERVAL)
C
C   (3) IF NO INFORMATION IS AVAILABLE ON THE SOLAR WIND SPEED, THEN SET VGSEX=-400.0
c       AND  VGSEY=VGSEZ=0. IN THAT CASE, THE GSW COORDINATE SYSTEM BECOMES
c       IDENTICAL TO THE STANDARD ONE.
C
      COMMON /GEOPACK1/ AAA(25),E11,E21,E31,E12,E22,E32,E13,E23,E33
C
C  DIRECT TRANSFORMATION:
C
      IF (J.GT.0) THEN
        XGSE=XGSW*E11+YGSW*E12+ZGSW*E13
        YGSE=XGSW*E21+YGSW*E22+ZGSW*E23
        ZGSE=XGSW*E31+YGSW*E32+ZGSW*E33
      ENDIF
C
C   INVERSE TRANSFORMATION: CARRIED OUT USING THE TRANSPOSED MATRIX:
C
      IF (J.LT.0) THEN
        XGSW=XGSE*E11+YGSE*E21+ZGSE*E31
        YGSW=XGSE*E12+YGSE*E22+ZGSE*E32
        ZGSW=XGSE*E13+YGSE*E23+ZGSE*E33
      ENDIF
C
      RETURN
      END
C
C========================================================================================
C
      SUBROUTINE GEOMAG_08 (XGEO,YGEO,ZGEO,XMAG,YMAG,ZMAG,J)
C
C    CONVERTS GEOGRAPHIC (GEO) TO DIPOLE (MAG) COORDINATES OR VICE VERSA.
C
C                    J>0                       J<0
C-----INPUT:  J,XGEO,YGEO,ZGEO           J,XMAG,YMAG,ZMAG
C-----OUTPUT:    XMAG,YMAG,ZMAG           XGEO,YGEO,ZGEO
C
C  ATTENTION:  SUBROUTINE  RECALC_08  MUST BE INVOKED BEFORE GEOMAG_08 IN TWO CASES:
C     /A/  BEFORE THE FIRST TRANSFORMATION OF COORDINATES
C     /B/  IF THE VALUES OF IYEAR AND/OR IDAY HAVE BEEN CHANGED
C
C  NO INFORMATION IS REQUIRED HERE ON THE SOLAR WIND VELOCITY, SO ONE
C  CAN SET VGSEX=-400.0, VGSEY=0.0, VGSEZ=0.0 IN RECALC_08.
C
C   LAST MOFIFICATION:  JAN 28, 2008
C
C   AUTHOR:  N. A. TSYGANENKO
C
      COMMON /GEOPACK1/ ST0,CT0,SL0,CL0,CTCL,STCL,CTSL,STSL,AB(26)

      IF(J.GT.0) THEN
       XMAG=XGEO*CTCL+YGEO*CTSL-ZGEO*ST0
       YMAG=YGEO*CL0-XGEO*SL0
       ZMAG=XGEO*STCL+YGEO*STSL+ZGEO*CT0
      ELSE
       XGEO=XMAG*CTCL-YMAG*SL0+ZMAG*STCL
       YGEO=XMAG*CTSL+YMAG*CL0+ZMAG*STSL
       ZGEO=ZMAG*CT0-XMAG*ST0
      ENDIF

      RETURN
      END
c
c=========================================================================================
c
      SUBROUTINE GEIGEO_08 (XGEI,YGEI,ZGEI,XGEO,YGEO,ZGEO,J)
C
C   CONVERTS EQUATORIAL INERTIAL (GEI) TO GEOGRAPHICAL (GEO) COORDS
C   OR VICE VERSA.
C                    J>0                J<0
C----INPUT:  J,XGEI,YGEI,ZGEI    J,XGEO,YGEO,ZGEO
C----OUTPUT:   XGEO,YGEO,ZGEO      XGEI,YGEI,ZGEI
C
C  ATTENTION:  SUBROUTINE  RECALC_08  MUST BE INVOKED BEFORE GEIGEO_08 IN TWO CASES:
C     /A/  BEFORE THE FIRST TRANSFORMATION OF COORDINATES
C     /B/  IF THE CURRENT VALUES OF IYEAR,IDAY,IHOUR,MIN,ISEC HAVE BEEN CHANGED
C
C  NO INFORMATION IS REQUIRED HERE ON THE SOLAR WIND VELOCITY, SO ONE
C  CAN SET VGSEX=-400.0, VGSEY=0.0, VGSEZ=0.0 IN RECALC_08.
C
C     LAST MODIFICATION:  JAN 28, 2008

C     AUTHOR:  N. A. TSYGANENKO
C
      COMMON /GEOPACK1/ A(13),CGST,SGST,B(19)
C
      IF(J.GT.0) THEN
       XGEO=XGEI*CGST+YGEI*SGST
       YGEO=YGEI*CGST-XGEI*SGST
       ZGEO=ZGEI
      ELSE
       XGEI=XGEO*CGST-YGEO*SGST
       YGEI=YGEO*CGST+XGEO*SGST
       ZGEI=ZGEO
      ENDIF

      RETURN
      END
C
C=======================================================================================
C
      SUBROUTINE MAGSM_08 (XMAG,YMAG,ZMAG,XSM,YSM,ZSM,J)
C
C  CONVERTS DIPOLE (MAG) TO SOLAR MAGNETIC (SM) COORDINATES OR VICE VERSA
C
C                    J>0              J<0
C----INPUT: J,XMAG,YMAG,ZMAG     J,XSM,YSM,ZSM
C----OUTPUT:    XSM,YSM,ZSM       XMAG,YMAG,ZMAG
C
C  ATTENTION:  SUBROUTINE  RECALC_08  MUST BE INVOKED BEFORE MAGSM_08 IN THREE CASES:
C     /A/  BEFORE THE FIRST TRANSFORMATION OF COORDINATES, OR
C     /B/  IF THE VALUES OF IYEAR,IDAY,IHOUR,MIN,ISEC HAVE CHANGED, AND/OR
C     /C/  IF THE VALUES OF COMPONENTS OF THE SOLAR WIND FLOW VELOCITY HAVE CHANGED
C
C    IMPORTANT NOTE:
C
C        A NON-STANDARD DEFINITION IS IMPLIED HERE FOR THE SOLAR MAGNETIC COORDINATE
C        SYSTEM:  IT IS ASSUMED THAT THE XSM AXIS LIES IN THE PLANE DEFINED BY THE
C        GEODIPOLE AXIS AND THE OBSERVED VECTOR OF THE SOLAR WIND FLOW (RATHER THAN
C        THE EARTH-SUN LINE).  IN ORDER TO CONVERT MAG COORDINATES TO AND FROM THE
C        STANDARD SM COORDINATES, INVOKE RECALC_08 WITH VGSEX=-400.0, VGSEY=0.0, VGSEZ=0.0
C
C     LAST MODIFICATION:  FEB 07, 2008
C
C     AUTHOR:  N. A. TSYGANENKO
C
      COMMON /GEOPACK1/ A(8),SFI,CFI,B(24)
C
      IF (J.GT.0) THEN
       XSM=XMAG*CFI-YMAG*SFI
       YSM=XMAG*SFI+YMAG*CFI
       ZSM=ZMAG
      ELSE
       XMAG=XSM*CFI+YSM*SFI
       YMAG=YSM*CFI-XSM*SFI
       ZMAG=ZSM
      ENDIF

      RETURN
      END
C
C=====================================================================================
C
       SUBROUTINE SMGSW_08 (XSM,YSM,ZSM,XGSW,YGSW,ZGSW,J)
C
C  CONVERTS SOLAR MAGNETIC (SM) TO GEOCENTRIC SOLAR-WIND (GSW) COORDINATES OR VICE VERSA.
C
C                  J>0                 J<0
C-----INPUT: J,XSM,YSM,ZSM        J,XGSW,YGSW,ZGSW
C----OUTPUT:  XGSW,YGSW,ZGSW       XSM,YSM,ZSM
C
C  ATTENTION:  SUBROUTINE RECALC_08 MUST BE INVOKED BEFORE SMGSW_08 IN THREE CASES:
C     /A/  BEFORE THE FIRST TRANSFORMATION OF COORDINATES
C     /B/  IF THE VALUES OF IYEAR,IDAY,IHOUR,MIN,ISEC HAVE BEEN CHANGED
C     /C/  IF THE VALUES OF COMPONENTS OF THE SOLAR WIND FLOW VELOCITY HAVE CHANGED
C
C    IMPORTANT NOTE:
C
C        A NON-STANDARD DEFINITION IS IMPLIED HERE FOR THE SOLAR MAGNETIC (SM) COORDINATE
C        SYSTEM:  IT IS ASSUMED THAT THE XSM AXIS LIES IN THE PLANE DEFINED BY THE
C        GEODIPOLE AXIS AND THE OBSERVED VECTOR OF THE SOLAR WIND FLOW (RATHER THAN
C        THE EARTH-SUN LINE).  IN ORDER TO CONVERT MAG COORDINATES TO AND FROM THE
C        STANDARD SM COORDINATES, INVOKE RECALC_08 WITH VGSEX=-400.0, VGSEY=0.0, VGSEZ=0.0
C
C     LAST MODIFICATION:  FEB 07, 2008
C
C     AUTHOR:  N. A. TSYGANENKO
C
      COMMON /GEOPACK1/ A(10),SPS,CPS,B(22)

      IF (J.GT.0) THEN
       XGSW=XSM*CPS+ZSM*SPS
       YGSW=YSM
       ZGSW=ZSM*CPS-XSM*SPS
      ELSE
       XSM=XGSW*CPS-ZGSW*SPS
       YSM=YGSW
       ZSM=XGSW*SPS+ZGSW*CPS
      ENDIF

      RETURN
      END
C
C==========================================================================================
C
      SUBROUTINE GEOGSW_08 (XGEO,YGEO,ZGEO,XGSW,YGSW,ZGSW,J)
C
C CONVERTS GEOGRAPHIC (GEO) TO GEOCENTRIC SOLAR-WIND (GSW) COORDINATES OR VICE VERSA.
C
C                   J>0                   J<0
C----- INPUT:  J,XGEO,YGEO,ZGEO    J,XGSW,YGSW,ZGSW
C---- OUTPUT:    XGSW,YGSW,ZGSW      XGEO,YGEO,ZGEO
C
C  ATTENTION:  SUBROUTINE  RECALC_08  MUST BE INVOKED BEFORE GEOGSW_08 IN THREE CASES:
C     /A/  BEFORE THE FIRST TRANSFORMATION OF COORDINATES, OR
C     /B/  IF THE VALUES OF IYEAR,IDAY,IHOUR,MIN,ISEC  HAVE CHANGED, AND/OR
C     /C/  IF THE VALUES OF COMPONENTS OF THE SOLAR WIND FLOW VELOCITY HAVE CHANGED
C
C  NOTE: THIS SUBROUTINE CONVERTS GEO VECTORS TO AND FROM THE SOLAR-WIND GSW COORDINATE
C        SYSTEM, TAKING INTO ACCOUNT POSSIBLE DEFLECTIONS OF THE SOLAR WIND DIRECTION FROM
C        STRICTLY RADIAL.  BEFORE CONVERTING TO/FROM STANDARD GSM COORDINATES, INVOKE RECALC_08
C        WITH VGSEX=-400.0 and VGSEY=0.0, VGSEZ=0.0
C
C     LAST MODIFICATION:  FEB 07, 2008
C
C     AUTHOR:  N. A. TSYGANENKO
C
      COMMON /GEOPACK1/ AA(16),A11,A21,A31,A12,A22,A32,A13,A23,A33,B(9)
C
      IF (J.GT.0) THEN
       XGSW=A11*XGEO+A12*YGEO+A13*ZGEO
       YGSW=A21*XGEO+A22*YGEO+A23*ZGEO
       ZGSW=A31*XGEO+A32*YGEO+A33*ZGEO
      ELSE
       XGEO=A11*XGSW+A21*YGSW+A31*ZGSW
       YGEO=A12*XGSW+A22*YGSW+A32*ZGSW
       ZGEO=A13*XGSW+A23*YGSW+A33*ZGSW
      ENDIF

      RETURN
      END
C
C=====================================================================================
C
      SUBROUTINE GEODGEO_08 (H,XMU,R,THETA,J)
C
C  THIS SUBROUTINE (1) CONVERTS VERTICAL LOCAL HEIGHT (ALTITUDE) H AND GEODETIC
C  LATITUDE XMU INTO GEOCENTRIC COORDINATES R AND THETA (GEOCENTRIC RADIAL
C  DISTANCE AND COLATITUDE, RESPECTIVELY; ALSO KNOWN AS ECEF COORDINATES),
C  AS WELL AS (2) PERFORMS THE INVERSE TRANSFORMATION FROM {R,THETA} TO {H,XMU}.
C
C  THE SUBROUTINE USES WORLD GEODETIC SYSTEM WGS84 PARAMETERS FOR THE EARTH'S
C  ELLIPSOID. THE ANGULAR QUANTITIES (GEO COLATITUDE THETA AND GEODETIC LATITUDE
C  XMU) ARE IN RADIANS, AND THE DISTANCES (GEOCENTRIC RADIUS R AND ALTITUDE H
C  ABOVE THE EARTH'S ELLIPSOID) ARE IN KILOMETERS.
C
C  IF J>0, THE TRANSFORMATION IS MADE FROM GEODETIC TO GEOCENTRIC COORDINATES
C   USING SIMPLE DIRECT EQUATIONS.
C  IF J<0, THE INVERSE TRANSFORMATION FROM GEOCENTRIC TO GEODETIC COORDINATES
C   IS MADE BY MEANS OF A FAST ITERATIVE ALGORITHM.
C
c-------------------------------------------------------------------------------
C                   J>0                     |            J<0
c-------------------------------------------|-----------------------------------
C--INPUT:   J        H          XMU         |    J         R          THETA
c         flag  altitude (km)  geodetic     |   flag   geocentric    spherical
c                              latitude     |         distance (km) colatitude
c                              (radians)    |                        (radians)
c-------------------------------------------|-----------------------------------
c                                           |
C----OUTPUT:         R           THETA      |          H              XMU
C                geocentric    spherical    |      altitude (km)    geodetic
C                distance (km) colatitude   |                       latitude
C                              (radians)    |                       (radians)
C-------------------------------------------------------------------------------
C
C   AUTHOR:  N. A. TSYGANENKO
c   DATE:    DEC 5, 2007
C
      DATA R_EQ, BETA /6378.137, 6.73949674228E-3/
c
c  R_EQ is the semi-major axis of the Earth's ellipsoid, and BETA is its
c  second eccentricity squared
c
      DATA TOL /1.E-6/
c
c   Direct transformation (GEOD=>GEO):
c
      IF (J.GT.0) THEN
       COSXMU=COS(XMU)
       SINXMU=SIN(XMU)
       DEN=SQRT(COSXMU**2+(SINXMU/(1.0+BETA))**2)
       COSLAM=COSXMU/DEN
       SINLAM=SINXMU/(DEN*(1.0+BETA))
       RS=R_EQ/SQRT(1.0+BETA*SINLAM**2)
       X=RS*COSLAM+H*COSXMU
       Z=RS*SINLAM+H*SINXMU
       R=SQRT(X**2+Z**2)
       THETA=ACOS(Z/R)
      ENDIF

c
c   Inverse transformation (GEO=>GEOD):
c
      IF (J.LT.0) THEN
       N=0
       PHI=1.570796327-THETA
       PHI1=PHI
  1    SP=SIN(PHI1)
       ARG=SP*(1.0D0+BETA)/SQRT(1.0+BETA*(2.0+BETA)*SP**2)
       XMUS=ASIN(ARG)
       RS=R_EQ/SQRT(1.0+BETA*SIN(PHI1)**2)
       COSFIMS=COS(PHI1-XMUS)
       H=SQRT((RS*COSFIMS)**2+R**2-RS**2)-RS*COSFIMS
       Z=RS*SIN(PHI1)+H*SIN(XMUS)
       X=RS*COS(PHI1)+H*COS(XMUS)
       RR=SQRT(X**2+Z**2)
       DPHI=ASIN(Z/RR)-PHI
       PHI1=PHI1-DPHI
       N=N+1
       IF (ABS(DPHI).GT.TOL.AND.N.LT.100) GOTO 1
       XMU=XMUS
      ENDIF

      RETURN
      END
C
C=====================================================================================
C
      SUBROUTINE RHAND_08 (X,Y,Z,R1,R2,R3,IOPT,PARMOD,EXNAME,INNAME)
C
C  CALCULATES THE COMPONENTS OF THE RIGHT HAND SIDE VECTOR IN THE GEOMAGNETIC FIELD
C    LINE EQUATION  (a subsidiary subroutine for the subroutine STEP_08)
C
C     LAST MODIFICATION:  FEB 07, 2008
C
C     AUTHOR:  N. A. TSYGANENKO
C
      DIMENSION PARMOD(10)
C
C     EXNAME AND INNAME ARE NAMES OF SUBROUTINES FOR THE EXTERNAL AND INTERNAL
C     PARTS OF THE TOTAL FIELD, E.G., T96_01 AND IGRF_GSW_08
C
      COMMON /GEOPACK1/ A(12),DS3,BB(2),PSI,CC(18)

      CALL EXNAME (IOPT,PARMOD,PSI,X,Y,Z,BXGSW,BYGSW,BZGSW)
      CALL INNAME (X,Y,Z,HXGSW,HYGSW,HZGSW)

      BX=BXGSW+HXGSW
      BY=BYGSW+HYGSW
      BZ=BZGSW+HZGSW
      B=DS3/SQRT(BX**2+BY**2+BZ**2)
      R1=BX*B
      R2=BY*B
      R3=BZ*B
      RETURN
      END
C
C===================================================================================
C
      SUBROUTINE STEP_08(X,Y,Z,DS,DSMAX,ERRIN,IOPT,PARMOD,EXNAME,INNAME)
C
C   RE-CALCULATES THE INPUT VALUES {X,Y,Z} (IN GSW COORDINATES) FOR ANY POINT ON A FIELD LINE,
C     BY MAKING A STEP ALONG THAT LINE USING RUNGE-KUTTA-MERSON ALGORITHM (G.N. Lance, Numerical
C      methods for high-speed computers, Iliffe & Sons, London 1960.)
C   DS IS A PRESCRIBED VALUE OF THE CURRENT STEP SIZE, DSMAX IS ITS UPPER LIMIT.
C   ERRIN IS A PERMISSIBLE ERROR (ITS OPTIMAL VALUE SPECIFIED IN THE S/R TRACE_08)
C     IF THE ACTUAL ERROR (ERRCUR) AT THE CURRENT STEP IS LARGER THAN ERRIN, THE STEP IS REJECTED,
C       AND THE CALCULATION IS REPEATED ANEW WITH HALVED STEPSIZE DS.
C     IF ERRCUR IS SMALLER THAN ERRIN, THE STEP IS ACCEPTED, AND THE CURRENT VALUE OF DS IS RETAINED
C       FOR THE NEXT STEP.
C     IF ERRCUR IS SMALLER THAN 0.04*ERRIN, THE STEP IS ACCEPTED, AND THE VALUE OF DS FOR THE NEXT STEP
C       IS INCREASED BY THE FACTOR 1.5, BUT NOT LARGER THAN DSMAX.
C   IOPT IS A FLAG, RESERVED FOR SPECIFYNG A VERSION OF THE EXTERNAL FIELD MODEL EXNAME.
C   ARRAY PARMOD(10) CONTAINS INPUT PARAMETERS FOR THE MODEL EXNAME.
C   EXNAME IS THE NAME OF THE SUBROUTINE FOR THE EXTERNAL FIELD MODEL.
C   INNAME IS THE NAME OF THE SUBROUTINE FOR THE INTERNAL FIELD MODEL (EITHER DIP_08 OR IGRF_GSW_08)
C
C   ALL THE ABOVE PARAMETERS ARE INPUT ONES; OUTPUT IS THE RECALCULATED VALUES OF X,Y,Z
C
C     LAST MODIFICATION:  APR 21, 2008   (SEE ERRATA AS OF THIS DATE)
C
C     AUTHOR:  N. A. TSYGANENKO
C
      DIMENSION PARMOD(10)
      COMMON /GEOPACK1/ A(12),DS3,B(21)
      EXTERNAL EXNAME,INNAME

  1   DS3=-DS/3.
      CALL RHAND_08 (X,Y,Z,R11,R12,R13,IOPT,PARMOD,EXNAME,INNAME)
      CALL RHAND_08 (X+R11,Y+R12,Z+R13,R21,R22,R23,IOPT,PARMOD,EXNAME,
     * INNAME)
      CALL RHAND_08 (X+.5*(R11+R21),Y+.5*(R12+R22),Z+.5*
     *(R13+R23),R31,R32,R33,IOPT,PARMOD,EXNAME,INNAME)
      CALL RHAND_08 (X+.375*(R11+3.*R31),Y+.375*(R12+3.*R32
     *),Z+.375*(R13+3.*R33),R41,R42,R43,IOPT,PARMOD,EXNAME,INNAME)
      CALL RHAND_08 (X+1.5*(R11-3.*R31+4.*R41),Y+1.5*(R12-
     *3.*R32+4.*R42),Z+1.5*(R13-3.*R33+4.*R43),
     *R51,R52,R53,IOPT,PARMOD,EXNAME,INNAME)
      ERRCUR=ABS(R11-4.5*R31+4.*R41-.5*R51)+ABS(R12-4.5*R32+4.*R42-.5*
     *R52)+ABS(R13-4.5*R33+4.*R43-.5*R53)
C
C  READY FOR MAKING THE STEP, BUT CHECK THE ACCURACY; IF INSUFFICIENT,
C   REPEAT THE STEP WITH HALVED STEPSIZE:
C
      IF (ERRCUR.GT.ERRIN) THEN
      DS=DS*.5
      GOTO 1
      ENDIF
C
C  ACCURACY IS ACCEPTABLE, BUT CHECK IF THE STEPSIZE IS NOT TOO LARGE;
C    OTHERWISE REPEAT THE STEP WITH DS=DSMAX
C
      IF (ABS(DS).GT.DSMAX) THEN
      DS=SIGN(DSMAX,DS)
      GOTO 1
      ENDIF
C
C  MAKING THE STEP:
C
  2   X=X+.5*(R11+4.*R41+R51)
      Y=Y+.5*(R12+4.*R42+R52)
      Z=Z+.5*(R13+4.*R43+R53)
C
C  IF THE ACTUAL ERROR IS TOO SMALL (LESS THAN 4% OF ERRIN) AND DS SMALLER
C   THAN DSMAX/1.5, THEN WE INCREASE THE STEPSIZE FOR THE NEXT STEP BY 50%
C
      IF(ERRCUR.LT.ERRIN*.04.AND.DS.LT.DSMAX/1.5) DS=DS*1.5
      RETURN
      END
C
C==============================================================================
C
      SUBROUTINE TRACE_08 (XI,YI,ZI,DIR,DSMAX,ERR,RLIM,R0,IOPT,PARMOD,
     * EXNAME,INNAME,XF,YF,ZF,XX,YY,ZZ,L,LMAX)
C
C  TRACES A FIELD LINE FROM AN ARBITRARY POINT OF SPACE TO THE EARTH'S
C  SURFACE OR TO A MODEL LIMITING BOUNDARY.
C
C  THIS SUBROUTINE ALLOWS TWO OPTIONS:
C
C  (1) IF INNAME=IGRF_GSW_08, THEN THE IGRF MODEL WILL BE USED FOR CALCULATING
C      CONTRIBUTION FROM EARTH'S INTERNAL SOURCES. IN THIS CASE, SUBROUTINE
C      RECALC_08 MUST BE CALLED BEFORE USING TRACE_08, WITH PROPERLY SPECIFIED DATE,
C      UNIVERSAL TIME, AND SOLAR WIND VELOCITY COMPONENTS, TO CALCULATE IN ADVANCE
C      ALL QUANTITIES NEEDED FOR THE MAIN FIELD MODEL AND FOR TRANSFORMATIONS
C      BETWEEN INVOLVED COORDINATE SYSTEMS.
C
C  (2) IF INNAME=DIP_08, THEN A PURE DIPOLE FIELD WILL BE USED INSTEAD OF THE IGRF MODEL.
C      IN THIS CASE, THE SUBROUTINE RECALC_08 MUST ALSO BE CALLED BEFORE TRACE_08.
C      HERE ONE CAN CHOOSE EITHER TO
C      (a) CALCULATE DIPOLE TILT ANGLE BASED ON DATE, TIME, AND SOLAR WIND DIRECTION,
C   OR (b) EXPLICITLY SPECIFY THAT ANGLE, WITHOUT ANY REFERENCE TO DATE/UT/SOLAR WIND.
C      IN THE LAST CASE (b), THE SINE (SPS) AND COSINE (CPS) OF THE DIPOLE TILT
C      ANGLE MUST BE SPECIFIED IN ADVANCE (BUT AFTER HAVING CALLED RECALC_08) AND FORWARDED
C      IN THE COMMON BLOCK /GEOPACK1/ (IN ITS 11th AND 12th ELEMENTS, RESPECTIVELY).
C      IN THIS CASE THE ROLE OF THE SUBROUTINE RECALC_08 IS REDUCED TO ONLY CALCULATING
C      THE COMPONENTS OF THE EARTH'S DIPOLE MOMENT.
C
C------------- INPUT PARAMETERS:
C
C   XI,YI,ZI - GSW COORDS OF THE FIELD LINE STARTING POINT (IN EARTH RADII, 1 RE = 6371.2 km),
C
C   DIR - SIGN OF THE TRACING DIRECTION: IF DIR=1.0 THEN THE TRACING IS MADE ANTIPARALLEL
C     TO THE TOTAL FIELD VECTOR (E.G., FROM NORTHERN TO SOUTHERN CONJUGATE POINT);
C     IF DIR=-1.0 THEN THE TRACING PROCEEDS IN THE OPPOSITE DIRECTION, THAT IS, PARALLEL TO
C     THE TOTAL FIELD VECTOR.
C
C   DSMAX - UPPER LIMIT ON THE STEPSIZE (SETS A DESIRED MAXIMAL SPACING BETWEEN
C                 THE FIELD LINE POINTS)
C
C   ERR - PERMISSIBLE STEP ERROR. A REASONABLE ESTIMATE PROVIDING A SUFFICIENT ACCURACY FOR MOST
C         APPLICATIONS IS ERR=0.0001. SMALLER/LARGER VALUES WILL RESULT IN LARGER/SMALLER NUMBER
C         OF STEPS AND, HENCE, OF OUTPUT FIELD LINE POINTS. NOTE THAT USING MUCH SMALLER VALUES
C         OF ERR MAY REQUIRE USING A DOUBLE PRECISION VERSION OF THE ENTIRE PACKAGE.
C
C   R0 -  RADIUS OF A SPHERE (IN RE), DEFINING THE INNER BOUNDARY OF THE TRACING REGION
C         (USUALLY, EARTH'S SURFACE OR THE IONOSPHERE, WHERE R0~1.0)
C         IF THE FIELD LINE REACHES THAT SPHERE FROM OUTSIDE, ITS INBOUND TRACING IS
C         TERMINATED AND THE CROSSING POINT COORDINATES XF,YF,ZF  ARE CALCULATED.
C
C   RLIM - RADIUS OF A SPHERE (IN RE), DEFINING THE OUTER BOUNDARY OF THE TRACING REGION;
C         IF THE FIELD LINE REACHES THAT BOUNDARY FROM INSIDE, ITS OUTBOUND TRACING IS
C         TERMINATED AND THE CROSSING POINT COORDINATES XF,YF,ZF ARE CALCULATED.
C
C   IOPT - A MODEL INDEX; CAN BE USED FOR SPECIFYING A VERSION OF THE EXTERNAL FIELD
C       MODEL (E.G., A NUMBER OF THE KP-INDEX INTERVAL). ALTERNATIVELY, ONE CAN USE THE ARRAY
C       PARMOD FOR THAT PURPOSE (SEE BELOW); IN THAT CASE IOPT IS JUST A DUMMY PARAMETER.
C
C   PARMOD -  A 10-ELEMENT ARRAY CONTAINING INPUT PARAMETERS NEEDED FOR A UNIQUE
C      SPECIFICATION OF THE EXTERNAL FIELD MODEL. THE CONCRETE MEANING OF THE COMPONENTS
C      OF PARMOD DEPENDS ON A SPECIFIC VERSION OF THAT MODEL.
C
C   EXNAME - NAME OF A SUBROUTINE PROVIDING COMPONENTS OF THE EXTERNAL MAGNETIC FIELD
C    (E.G., T89, OR T96_01, ETC.).
C   INNAME - NAME OF A SUBROUTINE PROVIDING COMPONENTS OF THE INTERNAL MAGNETIC FIELD
C    (EITHER DIP_08 OR IGRF_GSW_08).
C
C   LMAX - MAXIMAL LENGTH OF THE ARRAYS XX,YY,ZZ, IN WHICH COORDINATES OF THE FIELD
C          LINE POINTS ARE STORED. LMAX SHOULD BE SET EQUAL TO THE ACTUAL LENGTH OF
C          THE ARRAYS, DEFINED IN THE MAIN PROGRAM AS ACTUAL ARGUMENTS OF THIS SUBROUTINE.
C
C-------------- OUTPUT PARAMETERS:
C
C   XF,YF,ZF - GSW COORDINATES OF THE ENDPOINT OF THE TRACED FIELD LINE.
C   XX,YY,ZZ - ARRAYS OF LENGTH LMAX, CONTAINING COORDINATES OF THE FIELD LINE POINTS.
C   L - ACTUAL NUMBER OF FIELD LINE POINTS, GENERATED BY THIS SUBROUTINE.
C
C ----------------------------------------------------------
C
C     LAST MODIFICATION:  JAN 30, 2008.
C
C     AUTHOR:  N. A. TSYGANENKO
C
      DIMENSION XX(LMAX),YY(LMAX),ZZ(LMAX), PARMOD(10)
      COMMON /GEOPACK1/ AA(12),DD,BB(21)
      EXTERNAL EXNAME,INNAME
C
      L=0
      NREV=0
      DD=DIR
C
C  INITIALIZE THE STEP SIZE AND STARTING PONT:
C
      DS=0.5*DIR
      X=XI
      Y=YI
      Z=ZI
c
c  here we call RHAND_08 just to find out the sign of the radial component of the field
c   vector, and to determine the initial direction of the tracing (i.e., either away
c   or towards Earth):
c
      CALL RHAND_08 (X,Y,Z,R1,R2,R3,IOPT,PARMOD,EXNAME,INNAME)
      AD=0.01
      IF (X*R1+Y*R2+Z*R3.LT.0.) AD=-0.01
C
c     |AD|=0.01 and its sign follows the rule:
c (1) if DIR=1 (tracing antiparallel to B vector) then the sign of AD is the same as of Br
c (2) if DIR=-1 (tracing parallel to B vector) then the sign of AD is opposite to that of Br
c     AD is defined in order to initialize the value of RR (radial distance at previous step):

      RR=SQRT(X**2+Y**2+Z**2)+AD
c
  1   L=L+1
      IF(L.GT.LMAX) GOTO 7
      XX(L)=X
      YY(L)=Y
      ZZ(L)=Z
      RYZ=Y**2+Z**2
      R2=X**2+RYZ
      R=SQRT(R2)
C
c  check if the line hit the outer tracing boundary; if yes, then terminate
c   the tracing (label 8). The outer boundary is assumed reached, when the line
c   crosses any of the 3 surfaces: (1) a sphere R=RLIM, (2) a cylinder of radius 40Re,
c   coaxial with the XGSW axis, (3) the plane X=20Re:

      IF (R.GT.RLIM.OR.RYZ.GT.1600..OR.X.GT.20.) GOTO 8
c
c  check whether or not the inner tracing boundary was crossed from outside,
c  if yes, then calculate the footpoint position by interpolation (go to label 6):
c
      IF (R.LT.R0.AND.RR.GT.R) GOTO 6

c  check if we are moving outward, or R is still larger than 3Re; if yes, proceed further:
c
      IF (R.GE.RR.OR.R.GE.3.) GOTO 4
c
c  now we entered inside the sphere R=3: to avoid too large steps (and hence
c  inaccurate interpolated position of the footpoint), enforce the progressively
c  smaller stepsize values as we approach the inner boundary R=R0:
c
      FC=0.2
      IF(R-R0.LT.0.05) FC=0.05
      AL=FC*(R-R0+0.2)
      DS=DIR*AL
c
  4   XR=X
      YR=Y
      ZR=Z
c
      DRP=R-RR
      RR=R
c
      CALL STEP_08 (X,Y,Z,DS,DSMAX,ERR,IOPT,PARMOD,EXNAME,INNAME)
c
C  check the total number NREV of changes in the tracing radial direction; (NREV.GT.2) means
c   that the line started making multiple loops, in which case we stop the process:
C
      R=SQRT(X**2+Y**2+Z**2)
      DR=R-RR
      IF (DRP*DR.LT.0.) NREV=NREV+1
      IF (NREV.GT.4) GOTO 8
C
      GOTO 1
c
c  find the footpoint position by interpolating between the current and previous
c   field line points:
c
  6   R1=(R0-R)/(RR-R)
      X=X-(X-XR)*R1
      Y=Y-(Y-YR)*R1
      Z=Z-(Z-ZR)*R1
      GOTO 8
  7   WRITE (*,10)
      L=LMAX
  8   XF=X
      YF=Y
      ZF=Z
C
C  replace the coordinates of the last (L-th) point in the XX,YY,ZZ arrays
C   so that they correspond to the estimated footpoint position {XF,YF,ZF},
c   satisfying:  sqrt(XF**2+YF**2+ZF**2}=R0
C
      XX(L)=XF
      YY(L)=YF
      ZZ(L)=ZF
C
      RETURN
 10   FORMAT(//,1X,'**** COMPUTATIONS IN THE SUBROUTINE TRACE_08 ARE',
     *' TERMINATED: THE NUMBER OF POINTS EXCEEDED LMAX ****'//)
      END
c
C====================================================================================
C
      SUBROUTINE SHUETAL_MGNP_08(XN_PD,VEL,BZIMF,XGSW,YGSW,ZGSW,
     *  XMGNP,YMGNP,ZMGNP,DIST,ID)
C
C  FOR ANY POINT OF SPACE WITH COORDINATES (XGSW,YGSW,ZGSW) AND SPECIFIED CONDITIONS
C  IN THE INCOMING SOLAR WIND, THIS SUBROUTINE:
C
C (1) DETERMINES IF THE POINT (XGSW,YGSW,ZGSW) LIES INSIDE OR OUTSIDE THE
C      MODEL MAGNETOPAUSE OF SHUE ET AL. (JGR-A, V.103, P. 17691, 1998).
C
C (2) CALCULATES THE GSW POSITION OF A POINT {XMGNP,YMGNP,ZMGNP}, LYING AT THE MODEL
C      MAGNETOPAUSE AND ASYMPTOTICALLY TENDING TO THE NEAREST BOUNDARY POINT WITH
C      RESPECT TO THE OBSERVATION POINT {XGSW,YGSW,ZGSW}, AS IT APPROACHES THE MAGNETO-
C      PAUSE.
C
C  INPUT: XN_PD - EITHER SOLAR WIND PROTON NUMBER DENSITY (PER C.C.) (IF VEL>0)
C                    OR THE SOLAR WIND RAM PRESSURE IN NANOPASCALS   (IF VEL<0)
C         BZIMF - IMF BZ IN NANOTESLAS
C
C         VEL - EITHER SOLAR WIND VELOCITY (KM/SEC)
C                  OR ANY NEGATIVE NUMBER, WHICH INDICATES THAT XN_PD STANDS
C                     FOR THE SOLAR WIND PRESSURE, RATHER THAN FOR THE DENSITY
C
C         XGSW,YGSW,ZGSW - GSW POSITION OF THE OBSERVATION POINT IN EARTH RADII
C
C  OUTPUT: XMGNP,YMGNP,ZMGNP - GSW POSITION OF THE BOUNDARY POINT
C          DIST - DISTANCE (IN RE) BETWEEN THE OBSERVATION POINT (XGSW,YGSW,ZGSW)
C                 AND THE MODEL NAGNETOPAUSE
C          ID -  POSITION FLAG:  ID=+1 (-1) MEANS THAT THE OBSERVATION POINT
C          LIES INSIDE (OUTSIDE) OF THE MODEL MAGNETOPAUSE, RESPECTIVELY.
C
C  OTHER SUBROUTINES USED: T96_MGNP_08
C
c          AUTHOR:  N.A. TSYGANENKO,
C          DATE:    APRIL 4, 2003.
C
      IF (VEL.LT.0.) THEN
        P=XN_PD
      ELSE
        P=1.94E-6*XN_PD*VEL**2  ! P IS THE SOLAR WIND DYNAMIC PRESSURE (IN nPa)
      ENDIF

c
c  DEFINE THE ANGLE PHI, MEASURED DUSKWARD FROM THE NOON-MIDNIGHT MERIDIAN PLANE;
C  IF THE OBSERVATION POINT LIES ON THE X AXIS, THE ANGLE PHI CANNOT BE UNIQUELY
C  DEFINED, AND WE SET IT AT ZERO:
c
      IF (YGSW.NE.0..OR.ZGSW.NE.0.) THEN
         PHI=ATAN2(YGSW,ZGSW)
      ELSE
         PHI=0.
      ENDIF
C
C  FIRST, FIND OUT IF THE OBSERVATION POINT LIES INSIDE THE SHUE ET AL BDRY
C  AND SET THE VALUE OF THE ID FLAG:
C
      ID=-1
      R0=(10.22+1.29*TANH(0.184*(BZIMF+8.14)))*P**(-.15151515)
      ALPHA=(0.58-0.007*BZIMF)*(1.+0.024*ALOG(P))
      R=SQRT(XGSW**2+YGSW**2+ZGSW**2)
      RM=R0*(2./(1.+XGSW/R))**ALPHA
      IF (R.LE.RM) ID=+1
C
C  NOW, FIND THE CORRESPONDING T96 MAGNETOPAUSE POSITION, TO BE USED AS
C  A STARTING APPROXIMATION IN THE SEARCH OF A CORRESPONDING SHUE ET AL.
C  BOUNDARY POINT:
C
      CALL T96_MGNP_08(P,-1.,XGSW,YGSW,ZGSW,XMT96,YMT96,ZMT96,DIST,ID96)
C
      RHO2=YMT96**2+ZMT96**2
      R=SQRT(RHO2+XMT96**2)
      ST=SQRT(RHO2)/R
      CT=XMT96/R
C
C  NOW, USE NEWTON'S ITERATIVE METHOD TO FIND THE NEAREST POINT AT THE
C   SHUE ET AL.'S BOUNDARY:
C
      NIT=0

  1   T=ATAN2(ST,CT)
      RM=R0*(2./(1.+CT))**ALPHA

      F=R-RM
      GRADF_R=1.
      GRADF_T=-ALPHA/R*RM*ST/(1.+CT)
      GRADF=SQRT(GRADF_R**2+GRADF_T**2)

      DR=-F/GRADF**2
      DT= DR/R*GRADF_T

      R=R+DR
      T=T+DT
      ST=SIN(T)
      CT=COS(T)

      DS=SQRT(DR**2+(R*DT)**2)

      NIT=NIT+1

      IF (NIT.GT.1000) THEN
         PRINT *,
     *' BOUNDARY POINT COULD NOT BE FOUND; ITERATIONS DO NOT CONVERGE'
      ENDIF

      IF (DS.GT.1.E-4) GOTO 1

      XMGNP=R*COS(T)
      RHO=  R*SIN(T)

      YMGNP=RHO*SIN(PHI)
      ZMGNP=RHO*COS(PHI)

      DIST=SQRT((XGSW-XMGNP)**2+(YGSW-YMGNP)**2+(ZGSW-ZMGNP)**2)

      RETURN
      END
C
C=======================================================================================
C
      SUBROUTINE T96_MGNP_08(XN_PD,VEL,XGSW,YGSW,ZGSW,XMGNP,YMGNP,ZMGNP,
     * DIST,ID)
C
C  FOR ANY POINT OF SPACE WITH GIVEN COORDINATES (XGSW,YGSW,ZGSW), THIS SUBROUTINE DEFINES
C  THE POSITION OF A POINT (XMGNP,YMGNP,ZMGNP) AT THE T96 MODEL MAGNETOPAUSE WITH THE
C  SAME VALUE OF THE ELLIPSOIDAL TAU-COORDINATE, AND THE DISTANCE BETWEEN THEM.  THIS IS
C  NOT THE SHORTEST DISTANCE D_MIN TO THE BOUNDARY, BUT DIST ASYMPTOTICALLY TENDS TO D_MIN,
C  AS THE OBSERVATION POINT GETS CLOSER TO THE MAGNETOPAUSE.
C
C  INPUT: XN_PD - EITHER SOLAR WIND PROTON NUMBER DENSITY (PER C.C.) (IF VEL>0)
C                    OR THE SOLAR WIND RAM PRESSURE IN NANOPASCALS   (IF VEL<0)
C         VEL - EITHER SOLAR WIND VELOCITY (KM/SEC)
C                  OR ANY NEGATIVE NUMBER, WHICH INDICATES THAT XN_PD STANDS
C                     FOR THE SOLAR WIND PRESSURE, RATHER THAN FOR THE DENSITY
C
C         XGSW,YGSW,ZGSW - COORDINATES OF THE OBSERVATION POINT IN EARTH RADII
C
C  OUTPUT: XMGNP,YMGNP,ZMGNP - GSW POSITION OF THE BOUNDARY POINT, HAVING THE SAME
C          VALUE OF TAU-COORDINATE AS THE OBSERVATION POINT (XGSW,YGSW,ZGSW)
C          DIST -  THE DISTANCE BETWEEN THE TWO POINTS, IN RE,
C          ID -    POSITION FLAG; ID=+1 (-1) MEANS THAT THE POINT (XGSW,YGSW,ZGSW)
C          LIES INSIDE (OUTSIDE) THE MODEL MAGNETOPAUSE, RESPECTIVELY.
C
C  THE PRESSURE-DEPENDENT MAGNETOPAUSE IS THAT USED IN THE T96_01 MODEL
C  (TSYGANENKO, JGR, V.100, P.5599, 1995; ESA SP-389, P.181, OCT. 1996)
C
c   AUTHOR:  N.A. TSYGANENKO
C   DATE:    AUG.1, 1995, REVISED APRIL 3, 2003.
C
C
C  DEFINE SOLAR WIND DYNAMIC PRESSURE (NANOPASCALS, ASSUMING 4% OF ALPHA-PARTICLES),
C   IF NOT EXPLICITLY SPECIFIED IN THE INPUT:

      IF (VEL.LT.0.) THEN
       PD=XN_PD
      ELSE
       PD=1.94E-6*XN_PD*VEL**2
C
      ENDIF
C
C  RATIO OF PD TO THE AVERAGE PRESSURE, ASSUMED EQUAL TO 2 nPa:

      RAT=PD/2.0
      RAT16=RAT**0.14

C (THE POWER INDEX 0.14 IN THE SCALING FACTOR IS THE BEST-FIT VALUE OBTAINED FROM DATA
C    AND USED IN THE T96_01 VERSION)
C
C  VALUES OF THE MAGNETOPAUSE PARAMETERS FOR  PD = 2 nPa:
C
      A0=70.
      S00=1.08
      X00=5.48
C
C   VALUES OF THE MAGNETOPAUSE PARAMETERS, SCALED BY THE ACTUAL PRESSURE:
C
      A=A0/RAT16
      S0=S00
      X0=X00/RAT16
      XM=X0-A
C
C  (XM IS THE X-COORDINATE OF THE "SEAM" BETWEEN THE ELLIPSOID AND THE CYLINDER)
C
C     (FOR DETAILS OF THE ELLIPSOIDAL COORDINATES, SEE THE PAPER:
C      N.A.TSYGANENKO, SOLUTION OF CHAPMAN-FERRARO PROBLEM FOR AN
C      ELLIPSOIDAL MAGNETOPAUSE, PLANET.SPACE SCI., V.37, P.1037, 1989).
C
       IF (YGSW.NE.0..OR.ZGSW.NE.0.) THEN
          PHI=ATAN2(YGSW,ZGSW)
       ELSE
          PHI=0.
       ENDIF
C
       RHO=SQRT(YGSW**2+ZGSW**2)
C
       IF (XGSW.LT.XM) THEN
           XMGNP=XGSW
           RHOMGNP=A*SQRT(S0**2-1)
           YMGNP=RHOMGNP*SIN(PHI)
           ZMGNP=RHOMGNP*COS(PHI)
           DIST=SQRT((XGSW-XMGNP)**2+(YGSW-YMGNP)**2+(ZGSW-ZMGNP)**2)
           IF (RHOMGNP.GT.RHO) ID=+1
           IF (RHOMGNP.LE.RHO) ID=-1
           RETURN
       ENDIF
C
          XKSI=(XGSW-X0)/A+1.
          XDZT=RHO/A
          SQ1=SQRT((1.+XKSI)**2+XDZT**2)
          SQ2=SQRT((1.-XKSI)**2+XDZT**2)
          SIGMA=0.5*(SQ1+SQ2)
          TAU=0.5*(SQ1-SQ2)
C
C  NOW CALCULATE (X,Y,Z) FOR THE CLOSEST POINT AT THE MAGNETOPAUSE
C
          XMGNP=X0-A*(1.-S0*TAU)
          ARG=(S0**2-1.)*(1.-TAU**2)
          IF (ARG.LT.0.) ARG=0.
          RHOMGNP=A*SQRT(ARG)
          YMGNP=RHOMGNP*SIN(PHI)
          ZMGNP=RHOMGNP*COS(PHI)
C
C  NOW CALCULATE THE DISTANCE BETWEEN THE POINTS {XGSW,YGSW,ZGSW} AND {XMGNP,YMGNP,ZMGNP}:
C   (IN GENERAL, THIS IS NOT THE SHORTEST DISTANCE D_MIN, BUT DIST ASYMPTOTICALLY TENDS
C    TO D_MIN, AS WE ARE GETTING CLOSER TO THE MAGNETOPAUSE):
C
      DIST=SQRT((XGSW-XMGNP)**2+(YGSW-YMGNP)**2+(ZGSW-ZMGNP)**2)
C
      IF (SIGMA.GT.S0) ID=-1   !  ID=-1 MEANS THAT THE POINT LIES OUTSIDE
      IF (SIGMA.LE.S0) ID=+1   !  ID=+1 MEANS THAT THE POINT LIES INSIDE
C                                           THE MAGNETOSPHERE
      RETURN
      END
C
C===================================================================================
C
c

